Hifiverse

Vollverstärker - JAVA Hi-Fi SINGLE SHOT 400

Beschreibung, Bilder, technische Daten und Spezifikationen

JAVA Hi-Fi SINGLE SHOT 400
Bildquelle - (c) JAVA Hi-Fi

The Single Shot 400 is an integrated amplifier from JAVA Hi-Fi of New Zealand, the company led by its founder and CEO Martin Bell. It doubles the power of the Single Shot integrated amplifier from 200 W to 400 W into 8 ohms. In one chassis it combines an LDR preamplifier stage, a GaN FET power amplifier stage, a USB DAC, an MM phono stage and Bluetooth. The model was announced in spring 2025 and shown at AXPONA that April, with a launch price from USD 11,995. Its current price is from USD 12,995, and a CARBON edition was offered alongside the standard version.

Key specs that matter

Output power is 400 W into 8 ohms. Inputs are two pairs of RCA line-level inputs, an MM phono stage on RCA, a USB input for the DAC and Bluetooth aptX. Outputs are one pair of RCA variable pre-outs and a headphone output. Line inputs accept 0.5 - 5 V RMS. Dimensions are 440 x 415 x 130 mm (W x D x H), and weight is 14.7 kg.

Engineering and use context

Volume is set in a passive LDR (light dependent resistor) preamplifier stage, and the power stage uses GaN FET amplifier modules. JAVA notes that, because of the passive stage, the line inputs may not perform optimally with sources rated below 500 mV into loads of 3000 ohms or higher. In standby the GaN FET modules are disabled.

Its DAC is an R2R ladder design with its own dedicated linear power regulator. It uses dual AD1865 chips from Analog Devices, 18-bit non-oversampling parts that play files up to 768 kHz, and replaces the earlier Burr-Brown-based DAC of the range. MSB adjustment is handled natively on the AD1865 to improve linearity around the zero-crossing point.

An inverted PCB assembly is JAVA's method of vibration and resonance control for the audio circuit. ETI Research parts are used for both the RCA connectors and the speaker binding posts. Up front sits an 8 mm anodised aluminium panel in Black, Silver or Copper. Casework is offered in White Satin, Black High Gloss, Ebony Satin or High Gloss and Dark Walnut Satin or High Gloss, with real wood veneers. Volume and source selection are also available from the remote control.

Pairing

A turntable with an MM cartridge connects directly. An MC cartridge requires a step-up transformer. The pre-outs connect to a subwoofer, power amplifier or active speakers. Sources with XLR outputs need XLR to RCA adapters.

Alternatives

The Single Shot is the 200 W into 8 ohms version of the same integrated amplifier.

Spezifikationen

  • Modellbezeichnung

    SINGLE SHOT 400

  • Typ

    Integrated Amplifier with Phono

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    2 + 1 (MM)

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    400

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    440 x 415 x 130

  • Gewicht (kg)

    14.7

  • Offizieller Link