Hifiverse

Vollverstärker - JAVA Hi-Fi SINGLE SHOT

Beschreibung, Bilder, technische Daten und Spezifikationen

JAVA Hi-Fi SINGLE SHOT
Bildquelle - (c) JAVA Hi-Fi

The Single Shot 200 is an integrated amplifier from JAVA Hi-Fi, a New Zealand company started by Martin Bell, which began in 2016 with a passive LDR preamplifier and took it to Kickstarter in 2017. It combines an LDR pre-amp stage with a GaN FET power amp stage and adds a DAC, an MM phono stage and Bluetooth in one chassis. JAVA lists it from USD 9,495, and the UK price was GBP 9,290. Its balanced counterpart is the Double Shot 200 with XLR connections.

Key specs that matter

Output power is 200 W into 8 ohms (THD < 0.03%). THD+N is < 0.01% (8 ohms, 1 W, 20 Hz - 20 kHz) and 0.02% (8 ohms, 25 W, 1 kHz). Signal-to-noise ratio and dynamic range are > 108 dB, frequency response is 10 Hz - 20 kHz (±0.5 dB), and input impedance is 100 kohms. There are two pairs of RCA line-level inputs rated for 0.5 - 5 V RMS, one pair of RCA variable pre-outs, an MM phono stage on RCA inputs, a USB input for the R2R ladder DAC, Bluetooth aptX and one headphone output. Dimensions are 44 x 41.5 x 13 cm (W x D x H), and weight is 14.1 kg.

Engineering and use context

Volume is set in a passive LDR pre-amplifier stage, and the power stage uses GaN FET amplifier modules. Power comes from a low-noise Zero Current Switching (ZCS) SMPS with active power factor correction, dual ±32 V DC rails and 400 W continuous output, accepting 100 - 265 V AC. In the phono stage RIAA equalisation is done by a passive filter network within 1 dB across the audio band, with an anti-rumble filter, Japanese thin film resistors and German film capacitors. MM input impedance is 47 kohms with 200 pF, and gain is 45 dB at 1 kHz.

An inverted PCB assembly isolates the audio circuit from vibration. Casework is CNC-machined birch ply with Walnut or Ebony veneer, and the front panel is 8 mm anodised aluminium. Connectors and speaker binding posts come from ETI Research. Case finishes are White Satin, Black High Gloss, Ebony Satin, Ebony High Gloss, Dark Walnut Satin and Dark Walnut High Gloss, with a Black, Silver or Copper front panel. Each unit has a minimum of 72 hours burn-in before shipping. Warranty is two years, extended to three on registration.

Pairing

Sources with a rated output of at least 500 mV are required for the line inputs. An MC cartridge requires a step-up transformer. The pre-outs connect a subwoofer, power amplifier or active speakers.

Alternatives

The JAVA Single Shot 400 Integrated Amplifier raises output to 400 W into 8 ohms with the same LDR and GaN FET layout.

Spezifikationen

  • Modellbezeichnung

    SINGLE SHOT

  • Typ

    Integrated Amplifier with DAC and Phono

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    2

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200

  • Ausgangsleistung (4Ω) (W)

    400

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    440x 415 x 130

  • Gewicht (kg)

    9.5

  • Offizieller Link