The LM-88IA is a class AB push-pull integrated stereo amplifier from Line Magnetic with four KT88 output tubes. Its output stage operates in one of two selectable modes, fixed bias or cathode bias. Line Magnetic Audio of Zhuhai builds it with point-to-point wiring. The European price is EUR 2,999, and in Australia it starts at AUD 4,200.
Key specs that matter
Output power is 42 W + 42 W in fixed bias and 30 W + 30 W in cathode bias. Frequency response is 20 Hz - 50 kHz (-1 dB), THD is 1% (1 kHz), and S/N ratio is 87 dB (A-weighted). Input sensitivity is 180 mV for the line inputs and 1000 mV for the pre-in, with an input impedance of 100 kohms. Output taps are 4, 8 and 16 ohms. Power consumption is 250 W. Dimensions are 436 x 220 x 366 mm, and net weight is 30 kg.
Engineering and use context
Its tube complement is two 6CL8A and two 12BH7 in the input stage and four KT88 in the power stage. According to the European distributor, the KT88s are JJ Electronic, the 6CL8As Mullard and the 12BH7s Electro-Harmonix.
Power for the circuit comes from specially designed toroidal transformers on a Z11 core, and two Japanese audio-grade EI output transformers with wide bandwidth are used. All transformers and chokes are encapsulated and installed separately on the chassis, and Line Magnetic states that this lowers the disturbance between them. Volume is set by an ALPS control. Capacitors are specially designed by Line Magnetic Audio.
On the rear panel are three pairs of RCA line inputs, a pre-in input and screw speaker terminals that accept banana plugs. A soft start and time-delay circuit holds the amplifier for 30 seconds after switch-on. Control is by infrared remote, and a metal tube guard cage is removable. Two fuses, the remote control, a detachable power cord and the manual come in the box.
Pairing
Loudspeakers connect to the 4, 8 or 16 ohm taps according to their nominal impedance. Three line sources with RCA outputs can stay connected. The pre-in accepts an external preamplifier with a line-level output.
Alternatives
The Line Magnetic LM-150IA is a class AB push-pull integrated amplifier with four KT150 output tubes, rated at 100 W per channel.