The LM-170IA is a stereo integrated tube amplifier from Line Magnetic Audio, the company founded in 2005 by two brothers who began by servicing and reproducing Western Electric, Altec and Jensen equipment. It is a class AB ultra-linear push-pull design with four Russian KT170 output tubes. In Europe it lists at EUR 7,199, above the LM-150IA in the brand's push-pull range.
Key specs that matter
Power output is 130 W + 130 W (class AB push-pull). Tube complement is 3x 6922, 2x ECC82, 2x 6SN7EH and 4x KT170. Frequency response is 20 Hz - 35 kHz (-3 dB), THD is 1% (1 kHz), and S/N ratio is 89 dB. Input sensitivity is 0.36 V (RCA), 0.5 V (balanced) and 1 V (PRE), with an input impedance of 100 kohms. The auxiliary SUB/PRE output delivers 1.8 V. Output impedance taps are 4, 8 and 16 ohms. Power consumption is 750 W. Dimensions are 430 x 490 x 248 mm (W x D x H), and net weight is 45 kg.
Engineering and use context
In the voltage amplification stages Line Magnetic uses 6922 and ECC82 tubes. A 6SN7 cathode-coupled circuit then drives the KT170 pairs in ultra-linear push-pull. Line Magnetic specifies imported Russian tubes.
Its power transformer has an EI 133*80 iron core, and the output transformers use a 114*55 iron core. Line Magnetic states that the larger power transformer core keeps the supply stable under large dynamic operation and that the output transformer core widens the frequency response. Inter-stage coupling capacitors are German Mundorf MCap types, and volume is set by a Japanese ALPS potentiometer. Construction is hand-made with point-to-point wiring.
Output tube bias is set externally. A BIAS ADJ. section for the KT170 has a pointer-type level indicator and a static current detection function for the power tubes. On the rear panel are three RCA inputs (Line1, Line2 and Line3), a balanced input and a pure power-stage input. A dedicated pre-amplifier output circuit has its own 6922 tube (V6), and a dedicated auxiliary subwoofer output is provided. The infrared remote control covers volume and mute, and the tube cover is a plug-in type.
Pairing
A source with XLR outputs connects to the balanced input. An external preamplifier connects to the power-stage input, and the SUB/PRE output accepts a powered subwoofer or a second power amplifier. Loudspeakers connect to the 4, 8 or 16 ohm tap that matches their nominal impedance.
Alternatives
The LM-150IA is the smaller Line Magnetic push-pull integrated tube amplifier, with four KT150 output tubes rated at 100 W per channel.