Hifiverse

Vollverstärker - Ayon Audio Ayon Crossfire EVO Delta

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayon Audio Ayon Crossfire EVO Delta
Bildquelle - (c) Ayon Audio

Crossfire EVO Delta is a stereo integrated amplifier from Ayon Audio with a single-ended, pure Class A circuit built on directly heated triodes (DHT). It uses the same kind of Ayon super triode power tube as the Vulcan Evo monoblock. For the Delta version Ayon redesigned the driver and gain stages, shortened the signal path and added a new volume control, a refined output transformer, stronger power transformers and more powerful power and driver stage chokes. The chassis is brushed, anodised aluminium with a backlit Ayon logo, in black or chrome.

Key specs that matter

Output tubes are the Ayon AA62B-S super triode, one per channel. Output power is 2 x 50 W, with 4 and 8 ohm load impedance. Frequency response is 8 Hz - 50 kHz (-3 dB), S/N ratio at full power is 98 dB and overall negative feedback is 0 dB. Input impedance is 100 kohms at 1 kHz. Inputs are three line inputs, one XLR input and one Direct In, and there is one pre out. Volume is adjustable by remote control. Dimensions are 520 x 420 x 250 mm (W x D x H), and weight is 51 kg, or 62 kg shipped.

Engineering and use context

Two separate low-noise, insulated power transformers are encased, damped and RFI/EMI shielded. High voltage comes from a tube-regulated power supply with an Ayon AA5U4G. A quadruple choke-filtered supply serves the AA62B-S output tubes, and the pre and driver stages have their own choke-filtered supply. Filaments run from regulated DC supplies with soft start, and a logical sequenced soft-start power-up is intended to extend tube life.

Ayon specifies a super-wide bandwidth output transformer that is sealed in an anti-resonance compound. Bias is set by an external static bias adjustment and read on an analogue bias meter with a mV scale. A tube and electronic protection circuit system guards the amplifier.

Pairing

Loudspeakers with a nominal impedance of 4 or 8 ohms are required. Sources with balanced outputs use the XLR input. The pre out allows an external power amplifier or an active subwoofer to be added.

Alternatives

The Triton EVO is another integrated amplifier in the Ayon range.

Spezifikationen

  • Modellbezeichnung

    Ayon Crossfire EVO Delta

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    100 000

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 50

  • Ausgangsleistung (4Ω) (W)

    2 x 50

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    8

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Signal-Rausch-Abstand (dB)

    98

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    520 x 420 x 250

  • Gewicht (kg)

    50

  • Offizieller Link