Hifiverse

Vollverstärker - ToneWinner AD-66DPRO

Beschreibung, Bilder, technische Daten und Spezifikationen

ToneWinner AD-66DPRO
Bildquelle - (c) ToneWinner

The AD-66DPRO is a 2.1-channel integrated amplifier from Tone Winner, the Guangzhou audio company founded in 1992, which describes it as an entry-level hi-fi model. It is the upgraded version of the AD-66D, with a new MM/MC phono input and a new mobile app. A DAC, a digital player for USB disk and TF card, and a Bluetooth 5.0 receiver sit in the same chassis.

Key specs that matter

Output power is 100 W into 8 ohms and 170 W into 4 ohms (1 channel driven, 1 kHz, THD 1%), and rated impedance is 8 ohms. Gain is ≥39 dB and input impedance is 20 kohms. Frequency response is 20 Hz - 100 kHz (+1/-3 dB), S/N is ≥95 dB (A-weighted) and THD is ≤0.025% (1 kHz). Analogue inputs are CD, DVD and AUX on RCA plus the phono input, and digital inputs are three coaxial, one optical, ARC and USB-Audio. Size is 444 x 106 x 436 mm (W x H x D), and net weight is 11 kg.

Engineering and use context

Tone Winner uses what it calls a special Class A output technology to avoid switching distortion, with ONSEMI 150 W output transistors. Its D/A converter is the Analog Devices AD1955 chip, with independent digital filtering and a quoted 126 dB dynamic range. Coaxial and optical inputs accept up to 24-bit/192 kHz, and USB-Audio plays 24-bit/192 kHz from a computer. Source selection, volume and tone control run on a New Japan Radio NJW1194 electronic volume chip with a 4-in 1-out stereo selector and 0.5 dB steps. Bass and treble each adjust over ±10 dB, and a Direct mode bypasses them.

A 350 VA toroidal transformer and a total of 15,000 µF of capacitance form the power supply. ELNA RDB series capacitors are used for coupling. The phono stage has a cartridge switch, with an input impedance of 100 ohms for MC and 47 kohms for MM. Its digital player reads WAV, FLAC, APE, MP3 and AAC files. A VFD display with 10 brightness levels sits on the aluminium front panel, and an infrared remote control is supplied. Standby power consumption is 0.5 W, and the dual-voltage supply accepts 110-115 V and 220-230 V.

Pairing

Speakers of 4 to 8 ohms nominal impedance with a sensitivity above 87 dB are required. The SW-OUT jack connects an active subwoofer. Its PRE OUT allows use with a larger power amplifier, and the app for Android and iOS controls the amplifier from a phone.

Alternatives

Tone Winner's AD-99D is a Class A integrated amplifier with a USB and TF card player, subwoofer output and app control.

Spezifikationen

  • Modellbezeichnung

    AD-66DPRO

  • Typ

    Integrated Amplifier with Phono and DAC

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    100

  • Ausgangsleistung (4Ω) (W)

    170

  • Verstärkung (dBu)

    ≥39

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    ≥95

  • Klirrfaktor + Rauschen (%)

    ≤0.015

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    444 × 106 × 436

  • Gewicht (kg)

    11

  • Offizieller Link

Weitere Komponenten