The A5 is the entry-level integrated amplifier in Arcam's Radia series, which the Cambridge brand, part of Harman, introduced in 2022. One aluminium chassis holds a Class AB power amplifier, an MM phono stage, an ESS DAC with coaxial and optical inputs, and Bluetooth. Arcam presents the A5 as the latest step in amplifier design that goes back to its first product of 1976, the A&R Cambridge A60, and lists the CD5 CD player and ST5 streamer as its matching Radia sources.
Key specs that matter
Continuous power output (0.5% THD) is 50 W per channel into 8 ohms, both channels driven, 20 Hz - 20 kHz, and 75 W per channel into 4 ohms at 1 kHz. Harmonic distortion is 0.003% at 80% power into 8 ohms at 1 kHz. Analogue inputs are 3 RCA pairs with a frequency response of 20 Hz - 20 kHz (±0.2 dB) and a signal-to-noise ratio of 106 dB (A-weighted, ref. 50 W, 1 V input). The MM phono input has an input impedance of 47 kohms + 100 pF and follows the RIAA curve within ±1 dB from 20 Hz to 20 kHz. Coaxial and optical digital inputs accept 44.1 - 192 kHz at 16 or 24 bits, with 109 dB S/N (A-weighted, ref. 50 W, 0 dBFS). Bluetooth is version 5.2 with aptX Adaptive and AAC. Headphone output is 2.5 V into 32 ohms or 5 V into 300 ohms (max. RMS) for loads of 16 ohms - 2 kohms. Dimensions are 431 x 344 x 83 mm (W x D x H), and net weight is 8.14 kg.
Engineering and use context
Conversion uses an ESS ES9018 DAC, and the setup menu offers a choice of DAC filter plus a Standard or Wide PLL setting for digital sources of variable quality such as satellite receivers. The three digital inputs accept stereo PCM only, not multichannel or encoded audio. Arcam specifies the front, top, sides and rear panels in aluminium, with solid aluminium dials for input and volume. On the rear panel are pre-amp outputs, a phono ground terminal, speaker outputs and a control input for Radia series source components. Bluetooth headphones can be paired as an audio output, while a source device streams to the Bluetooth input with up to 24-bit audio. The front 3.5 mm headphone socket mutes the speakers and pre-amp outputs by default. A USB socket on the back is for software updates only. Auto standby engages after 20 minutes without playback and can be switched off. A compact remote control with two AAA batteries is supplied, and packaging is plastic-free.
Pairing
Loudspeakers rated for 4 or 8 ohms can be connected. The pre-amp outputs allow a subwoofer or a separate power amplifier. A turntable with an MM cartridge connects directly to the phono input. The matching Radia sources are the CD5 and the ST5.
Alternatives
The A15 is the next Radia integrated amplifier up, with 80 W per channel into 8 ohms.