The SA30 is a streaming integrated amplifier and DAC from Arcam, the British brand owned by Harman International. It sits at the top of the HDA amplifier range above the SA10 and the SA20, and Arcam now lists it as discontinued.
Key specs that matter
Power output is 120 W per channel into 8 ohms and 220 W into 4 ohms, both channels driven, from a Class G amplifier, with THD+N of 0.002%. Frequency response is 20 Hz - 20 kHz (±1 dB) and the line inputs have 1 V nominal sensitivity and 10 kohms input impedance. Five analogue inputs include a phono input with separate MM and MC sockets and a 3.5 mm AUX input on the front panel. Digital inputs are two coaxial, two optical and one HDMI ARC/eARC. Conversion is by a 32-bit ESS9038K2M Sabre DAC. The case measures 433 x 100 x 323 mm (W x H x D, including feet, control knob and speaker terminals) and weight is 12 kg.
Engineering and use context
Analogue inputs are digitised by an AK5552 ADC at 192 kHz/32-bit for the internal DSP. The Analogue Direct mode bypasses the ADC, DSP and DAC on the CD, PVR, STB and PHONO inputs and sends the signal straight to the preamp stage. Its phono stage has 5 mV sensitivity and 47 kohms + 200 pF loading for MM, and 0.35 mV with 470 ohms + 1 nF for MC, each with 80 dB A-weighted S/N. On the coaxial inputs PCM runs to 192 kHz, and on the optical inputs to 96 kHz. The amplifier accepts two-channel PCM only, not multichannel audio.
Network playback is over Ethernet or Wi-Fi, with Spotify Connect (lossless with the latest software), Tidal Connect Hi-Res, Apple AirPlay 2, Google Chromecast built-in and UPnP streaming. The SA30 is Roon Ready and supports MQA, and a USB Type A socket plays audio files from pen drives. Through the ARC/eARC input it takes the audio of the television's internal tuner. For custom installation there is full IP control including Control4 and Crestron, plus RS232 and IR. The 3.5 mm headphone socket accepts loads from 16 ohms to 2 kohms, and the pre-amp outputs and speakers mute when headphones are plugged in.
Pairing
A pre-amplifier output allows bi-amping or use of the SA30 as a preamplifier with an external power amplifier. The speaker terminals accept single wiring or bi-wiring. A turntable with an MM or MC cartridge connects to the matching phono socket.
Alternatives
The Arcam SA20 is the integrated amplifier below the SA30 in the HDA range.