The A1 is a class A integrated amplifier from Musical Fidelity, first released in 1985. For the 2023 version the company kept all specifications, the appearance and the circuits of the 1985 original, and added an updated transformer, power supplies and modern low noise components. Its oversized heatsinks define its look and are essential for its operation. The A1 sells for GBP 1,499 in Britain and AUD 3,000 in Australia.
Key specs that matter
Power is 25 W per channel into 8 ohms in pure class A, with 42.5 V peak to peak and 25 A peak to peak. Gain at maximum volume is 42 dB in Normal mode and 32 dB in Direct mode. Damping factor is 150, signal-to-noise ratio is 82 dB and channel separation is 85 dB. Frequency response is +0, -1 dB (10 Hz - 40 kHz). Line inputs take 300 mV nominal and 8 V max, at 25 kohm. On the MM phono input, sensitivity is 5 mV with 100 pF, 50 kohm and 40 dB of gain, and the MC input has 450 µV with 1 kohm and 60 dB of gain. Dimensions are 440 x 68.3 x 283.3 mm (W x H x D), weight is 10.5 kg, and maximum consumption is 130 W, with 0 W in standby.
Engineering and use context
Musical Fidelity uses a completely discrete, symmetrical class A topology with two Planar Audio output transistors per channel. When the class A standing current is exceeded, the output stage slides, rather than switches, into class B style operation. Instead of the shared transformer of 1985, the new one has dual mono split rail windings, giving fully independent left and right supplies, and each power amplifier has double the supply capacity, with reduced ripple and noise. Main supplies are filtered for better regulation and reduced switch-on surge.
Low noise TL071 JFET circuitry forms the preamplifier, unchanged from 1985. A Direct switch bypasses the gain block before the volume control for roughly 10 dB less gain, intended for high-output digital sources and sensitive loudspeakers. Volume is set by a motorised ALPS RK series potentiometer, operated from an IR remote control. In the phono section a discrete current-mode input stage is followed by a current to voltage conversion stage for further amplification and RIAA equalisation (±1 dB), with automatic input impedance matching for MC. Signal path capacitors are polypropylene, and resistors are low noise metal film types. Mains is internally set to 230 V or 115 V, with 100 V optional.
Pairing
Five RCA line inputs and one MM/MC phono input are provided. A fixed tape output and a variable pre-out (100 ohms) allow a recorder or an external power amplifier. One pair of 4 mm binding posts is provided for the loudspeakers.
Alternatives
The M6xi is a larger Musical Fidelity integrated amplifier, rated at 220 W per channel into 8 ohms, with HDMI eARC and USB-C inputs.