Hifiverse

Vollverstärker - Musical Fidelity B1xi

Beschreibung, Bilder, technische Daten und Spezifikationen

Musical Fidelity B1xi
Bildquelle - (c) Musical Fidelity

The B1xi is an integrated amplifier from Musical Fidelity that also includes a DAC, a moving-magnet phono stage and a Bluetooth 5.1 input. Its power amplifier is a fully discrete transistor design in class A/B. Musical Fidelity left out WiFi streaming, a display and an app on purpose, and added an isolated 5 V USB-C output to power an external streamer instead.

Key specs that matter

Rated output with both channels driven is 60 W per channel into 8 ohms and 100 W into 4 ohms at 1% THD, with 140 W peaks into 2 ohms. At 0.09% THD across 20 Hz - 20 kHz it delivers 50 W into 8 ohms and 80 W into 4 ohms. Damping factor is 30, and peak current is 8 A peak to peak. Line inputs have a signal-to-noise ratio above 100 dB (A-weighted), 47 kohm input impedance and a response of 10 Hz - 30 kHz (+0, -3 dB). The phono input has 42 dB of gain, 5 mV nominal sensitivity, 47 kohm input impedance and RIAA accuracy of ±1 dB from 20 Hz to 20 kHz. Coaxial, optical and ARC inputs accept PCM up to 24-bit/192 kHz. The unit measures 430 x 90 x 324 mm (W x H x D) and weighs 7.2 kg.

Engineering and use context

Each channel has one pair of output devices, supplied from a toroidal transformer. Preamplifier, power amplifier and digital section have independent power supplies, and the preamplifier has its own linear supply. Volume is set by a motor-driven analogue potentiometer.

Digital conversion uses an ESS9018 chip. The digital and ARC boards are on separate PCBs with their own linear power supply, and RF shielding and board placement avoid interference with the analogue stages. According to Musical Fidelity, the design team spent a year on the circuit layout and the position of the boards relative to the transformer.

Connections are three pairs of RCA line inputs, the MM phono input, coaxial, optical and HDMI ARC digital inputs, a variable RCA pre-out and one pair of 4 mm binding posts. The chassis is all metal, with metal controls and a front panel milled from extruded aluminium. Mains voltage is factory set to 115 or 230 V, and maximum consumption is 280 W.

Pairing

A turntable with an MM cartridge, or a high-output MC of 1.5 mV or more, connects directly to the phono input. The pre-out allows bi-amping or an active subwoofer. A TV with HDMI ARC connects to the ARC input.

Alternatives

The M2si is the next integrated amplifier in the Musical Fidelity range.

Spezifikationen

  • Modellbezeichnung

    B1xi

  • Typ

    Integrated amplifier with DAC

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    3 +MM phono

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    2 x 60

  • Ausgangsleistung (4Ω) (W)

    2 x 100

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    30

  • Abmessungen (mm)

    430 x 90 x 324

  • Gewicht (kg)

    7.2

  • Offizieller Link