Hifiverse

Vollverstärker - Burmester 101

Beschreibung, Bilder, technische Daten und Spezifikationen

Burmester 101
Bildquelle - (c) Burmester

The 101 is an integrated amplifier in the Classic Line of Burmester Audiosysteme, the Berlin company founded in 1977 by Dieter Burmester. At launch it was the latest integrated amplifier in the range. Class D power stages are combined with an analogue power supply. Burmester names it as the partner for the 102 CD player.

Key specs that matter

Output power is 2 x 120 W into 4 ohms. Power bandwidth is 3 Hz - 45 kHz (-3 dB). THD+N is 0.008%, signal-to-noise ratio is above 92 dB and the damping factor is above 165. Input sensitivity is 260 mV (1% THD+N, 4 ohms). Input impedance is 9.6 kohms on XLR and 7.4 kohms on RCA. There are three XLR and two RCA inputs, a balanced preamplifier output and a 6.3 mm headphone output on the front panel. Burmester gives 482 x 93 x 350 mm (W x H x D) and 12 kg.

Engineering and use context

Its construction is fully balanced, and the signal path is DC-coupled with no coupling capacitors. Burmester lists low overall negative feedback, high reservoir and filter capacitance and a very short warm-up time. The damping factor stays uniformly high across the full frequency range, and the amplifier is stable into all loads over that range.

A protection circuit outside the signal path monitors temperature, DC offset and peak current. Speaker cables connect to solid screw terminals, and Burmester specifies spade connectors for them. A switchable Smooth function is intended for low playback levels.

Volume and source selection work from the remote control, and the display can be switched off. BurLink control over RS-232 is optional. With the balanced preamplifier outputs the 101 can serve as a pure preamplifier once separate power amplifiers are added.

Pairing

Spade connectors are required on the speaker terminals. The matching CD player is the Burmester 102. All inputs are line level, so a turntable requires an external phono stage.

Alternatives

The 082 is another integrated amplifier in Burmester's Classic Line.

Spezifikationen

  • Modellbezeichnung

    101

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    N/A

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten