Hifiverse

Vollverstärker - Burmester 082

Beschreibung, Bilder, technische Daten und Spezifikationen

Burmester 082
Bildquelle - (c) Burmester

The 082 is a Classic Line integrated amplifier from Burmester of Berlin, produced from 2008 to 2024. In 2013 it was priced at about EUR 9,900. Like all Burmester integrated amplifiers, it uses the company's X-Amp amplifier technology and a tone control that can be switched out, and it is balanced in design and fully DC-coupled. The 082 is a line-level amplifier without phono or digital inputs.

Key specs that matter

Inputs are three balanced XLR sockets labelled CD, TUNER and AUX1, two unbalanced RCA sockets labelled AUX2 and TAPE, and a balanced SURROUND input. Outputs are a balanced and an unbalanced preamplifier output, a TAPE output for an analogue recorder and a 6.3 mm stereo headphone jack. Volume is set in 61 steps from 00 to 60. Bass and treble are adjustable in 2 dB steps and balance in 1 dB steps. Dimensions are 482 x 177 x 482 mm (W x H x D), excluding plugs, and weight is 25.1 kg. Maximum power consumption is 550 W. Mains versions are 082-100 for 100 V, 082-110 for 110-115 V and 082-220 for 220-230 V.

Engineering and use context

In normal operation the tone control is completely decoupled from the signal path and is switched in with the TONE button. The signal at the SURROUND input is routed directly to the power amplifier section, so volume and tone control have no effect on it. Both preamplifier outputs and the TAPE output carry the selected source unaffected by volume and tone control. Unbalanced sources can also use the XLR inputs through XLR-RCA adapters.

A setup menu sets an individual input level for each input, the switch-on volume and the gain of the power amplifier section, HI or LO, for level matching to the loudspeakers. A MONITOR function provides off-tape monitoring.

Its protection circuit opens the loudspeaker relays and shows the fault in the display. On overtemperature the volume drops by four steps, and if the temperature does not fall within 3 minutes the unit goes to standby. On overcurrent through the output transistors or DC offset at an output the volume is reduced until the fault clears.

BurLink control runs over a 9-pin RS-232 socket at 9600 baud or over USB, for systems such as a PC or Crestron. Remote DC IN and OUT sockets switch other Burmester units on and off in master or slave mode. The 067 remote control is supplied, and display brightness has four levels.

Pairing

The preamplifier outputs allow a further power amplifier to be added. A surround processor with its own volume control connects to the SURROUND input. A turntable requires an external phono stage.

Alternatives

The Burmester 032 is another integrated amplifier in the Classic Line.

Spezifikationen

  • Modellbezeichnung

    082

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    2

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 × 179 × 492

  • Gewicht (kg)

    25

  • Offizieller Link

Weitere Komponenten