Hifiverse

Plattenspieler - SAT XD1

Beschreibung, Bilder, technische Daten und Spezifikationen

SAT XD1
Bildquelle - (c) SAT

The XD1 is the reference turntable of SAT, a Swedish maker of turntables and pickup arms, and it was designed by Marc Gomez. It is a direct-drive deck delivered with a titanium-reinforced CF1 arm in either 9-inch or 12-inch length, a version reserved for XD1 owners. The XD1 is machined in Sweden and built in limited numbers. It is sold only through selected specialists, with availability and pricing by enquiry.

Key specs that matter

Drive is a reengineered direct drive with a hand-rebuilt core, running at 33.3, 45 and 78 rpm. The chassis is a monoblock of magnesium-aluminium-silicon alloy. Its 12 kg platter is precision-machined from a precipitation-aged Mg-Si-Al alloy with Swedish brass weights and carries an engineering polymer surface. Isolation is dual-complementary, with a Minus K negative-stiffness platform for 1.5 - 100 Hz and matched multi-elastomer modules in the legs above 100 Hz. Arms mount on a drop-in key pod interface with repeatable geometry. Pickup arm options are the CF1-09Ti and CF1-12Ti. Hold-down is by an optional passive self-contained vacuum plus a precision clamp.

Engineering and use context

Inside, the motor sits on an all-new internal platform with a three-point bracket for stress-free coupling. A preloading system locks the stator rigidly to the chassis, and a dedicated damping system reduces high-frequency vibration. SAT states that the motor turns the platter more accurately as a result.

High-density alloy is machined from a single piece to make the chassis, and its three legs were shaped through finite-element analysis and virtual design-of-experiments. Sharply machined edges diffract sound waves. On the platter, the polymer top layer keeps the aluminium away from the cartridge to avoid magnetic field interaction and damps the record. Each elastomer module in the legs is tuned to the mass of the table.

Bolts stiffen the key-type pod interface to give a rigid, repeatable coupling between arm and chassis. In the CF1-Ti arms a titanium tube sits inside the carbon-fibre armtube, and the headshell frame is titanium. With the optional vacuum, a pump evacuates the air beneath the disc and applies more than 135 kg of force across it. It is activated a few seconds before playback and shuts off completely while the record plays.

Pairing

A cartridge for the CF1-Ti headshell is required. A phono stage matched to that cartridge is required.

Alternatives

The XD1 is the only turntable in the SAT range.

Spezifikationen

  • Modellbezeichnung

    XD1

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Direct-drive

  • Subchassis/Aufhängung

    Fixed

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    12 kg magnesium-aluminum-silicon alloy

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link