Hifiverse

Plattenspieler - FiiO TT13 BT

Beschreibung, Bilder, technische Daten und Spezifikationen

FiiO TT13 BT
Bildquelle - (c) FiiO

The FiiO TT13 BT is a fully automatic turntable with a built-in phono preamp and a Bluetooth transmitter. It is the Bluetooth version of the TT13, and together with the standard version it is FiiO's first turntable, first shown at Munich High End. Finishes are black, white and silver.

Key specs that matter

Speeds are 33 1/3 and 45 rpm, and a switch sets the arm for 7-inch or 12-inch records. Wow and flutter is ≤0.15% WRMS (33 1/3 rpm, 3 kHz). An Audio-Technica AT3600LA cartridge is mounted on a brass tonearm with a painted finish. Line output is ≥800 mV + 800 mV (1 kHz, 0 dB), with THD+N ≤3.5%, SNR ≥75 dB (A-weighted) and a noise floor below 150 µV. Bluetooth 5.2 runs on a Qualcomm QCC3040 with SBC, aptX, aptX LL and aptX HD. Dimensions are about 450 x 350 x 114 mm and weight is about 3.85 kg.

Engineering and use context

FiiO uses a custom fully automatic movement and a custom low-noise motor. At a press of the start button the mechanism lifts the arm and moves it to the record, and buttons for repeat and tonearm up/down sit beside power, speed, Bluetooth pairing and play/pause. An infrared remote control is included.

Inside is a two-stage phono preamp built from two JRC5532 op-amps connected in series. Connections are an RCA line output and a separate ground terminal. There is no volume control, and an external balance potentiometer sets the level of the left and right channels.

Power comes from a built-in switching supply for 100-240 V AC, 50/60 Hz. An external 12 V DC supply of at least 1 A can be connected to the 6.2 mm DC port instead, and AC has priority when both are connected. The top is an all-aluminium alloy panel with a polished surface. Seven lighting effects with adjustable brightness are offered in purple, red, orange, blue, cyan, green and white, or can be switched off.

Pairing

A line-level input is required, on an integrated amplifier, a preamplifier or active speakers with their own volume control. A separate phono stage is not needed. Wireless headphones and speakers need aptX HD, aptX LL, aptX or SBC support.

Alternatives

The standard FiiO TT13 is the same turntable without the Bluetooth transmitter.

Spezifikationen

  • Modellbezeichnung

    TT13 BT

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    450 × 350 × 114

  • Gewicht (kg)

    3.85

  • Offizieller Link