Hifiverse

Plattenspieler - Yamaha TT-S303

Beschreibung, Bilder, technische Daten und Spezifikationen

Yamaha TT-S303
Bildquelle - (c) Yamaha

The TT-S303 is a manual belt-drive turntable from Yamaha with a built-in phono EQ amplifier, a static balance straight tonearm and a pre-mounted MM cartridge. Released in 2018, it marked the return of Yamaha to turntables. Its simple design has a gloss finish to match Yamaha's HiFi components.

Key specs that matter

Speeds are 33 1/3 and 45 rpm, with rotation speed variation of ±2% and wow and flutter of 0.2%. The platter is 300 mm aluminium die-cast, belt-driven by a DC motor. Output level is 140 mV (-17 dBV) with RIAA EQ and 2.5 mV ±3 dBV without RIAA EQ (1 kHz, 3.54 cm/s). Signal-to-noise ratio is 67 dB or higher (A-weighted, 20 kHz LPF). Effective arm length is 223.5 mm, overhang is 19 mm, stylus pressure adjustment range is 0 - 4 g, and acceptable cartridge weight is 15.5 - 19 g including headshell. Dimensions are 450 x 136 x 368 mm (W x H x D), and weight is 4.8 kg.

Engineering and use context

Yamaha chose belt drive because motor vibration has little influence and rotation stays stable, and the die-cast aluminium platter is turned by a high-torque DC motor. Its high-rigidity cabinet is made of high-density MDF for vibration damping. Each insulator has an elastomer inside for vibration isolation.

The tonearm is a lightweight, rigid static balance straight arm made of aluminium. Supplied as standard is an MM cartridge with an output voltage of 2.5 mV (1 kHz, 3.54 cm/s), a stylus pressure of 3.5 ±0.5 g, a weight of 5.0 ±0.3 g and a height of 17.0 ±0.7 mm. It sits in a 10 g headshell, including screws, nuts and wires.

Inside, the phono EQ amplifier uses a JRC (New Japan Radio) op-amp. A switch selects between phono and line output on the single pair of RCA terminals. Power consumption is 1.5 W, and standby power consumption is 0.1 W.

Pairing

In line mode, the turntable connects to a line input of an amplifier without a phono stage, or to active speakers. In phono mode, an amplifier with an MM phono input is required. Replacement cartridges must keep the total weight with headshell within the arm's range.

Alternatives

The Yamaha MusicCast VINYL 500 is the other turntable in the Yamaha range, with network streaming added.

Spezifikationen

  • Modellbezeichnung

    TT-S303

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Aluminium die-cast (Diameter 30 cm)

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0.2

  • Signal-Rausch-Abstand (dB)

    >67

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    450 x 136 x 368

  • Gewicht (kg)

    4.8

  • Offizieller Link

Weitere Komponenten