The TT level 2.1DC is a belt-driven turntable from Takumi, sold as a complete package with a titanium tonearm and an external SpeedPod speed controller. Rik Stoet designed it, and its public debut came at the Munich High End show of May 2025. In the Takumi range it sits between the Level 1.1 and the Level 3.1. The launch price was EUR 1,695, which covered the deck, the arm, the SpeedPod and an Audio-Technica AT3600L cartridge that Takumi supplies for functional testing rather than as a final choice.
Key specs that matter
Speeds of 33.33 and 45 rpm are available, and the SpeedPod trims either one in steps of 0.01 rpm. Power comes from a DC motor coupled by belt, and wow and flutter is rated below 0.10 %. The deck measures 430 x 327 x 152 mm and weighs 8.1 kg. Buyers choose between clear and black acrylic.
Engineering and use context
The plinth is cut from 19 mm acrylic on CNC machines, and the motor lives in its own damped housing that stands apart from the main plinth, so motor vibration has to pass through the belt before it reaches the platter. Speed is checked in real time by a Hall sensor reading a magnetic ring under the platter, and the control loop corrects drift automatically. The acrylic platter rests on a solid aluminium subplatter running on a ceramic axle in a brass bearing, and records sit directly on the acrylic with no mat. The tonearm has a thin-walled titanium tube with a fixed headshell and a full cardanic bearing with preloaded radial bearings. Anti-skating works magnetically without friction, VTA is set through a three-point base, azimuth at the headshell and lift height with set screws. A shielded 120 cm phono lead with a dual ground system is built into the arm, and the armlift and arm rest are integrated, with the rest height following the VTA setting. Three adjustable feet with internal damping and a built-in bubble level handle levelling, and Takumi describes the design as upgradeable and serviceable.
Pairing
Because the arm has a fixed headshell and an integrated lead, a cartridge change means remounting on the arm itself, and the electronics have to sit within reach of that lead. The supplied test cartridge leaves room for an upgrade, and Takumi's own moving-coil range is the obvious route, used with a phono stage or an amplifier input that matches the chosen cartridge type.
Alternatives
The Takumi TT Level 3.1 is the next belt-driven turntable up in the range, pairing a Delrin platter with a solid beech or walnut plinth sandwiched between acrylic layers.