The TT-15S1 is a reference belt-drive turntable from Marantz, sold complete with tone arm and a Clearaudio Virtuoso moving-magnet cartridge. Marantz published its specification sheet in 2006, and the US list price is USD 3,000. Operation is fully manual, with 33 1/3 and 45 rpm. The only finish is white.
Key specs that matter
Speed variation is ±0.2% and signal-to-noise ratio is 80 dB. A 2-point radial tone arm has an effective length of 239 mm and an overhang of 17 mm. Stylus pressure is adjustable over 0 - 5 g in 0.1 g graduations, and the arm takes cartridges of 3 - 18 g (excluding headshell). For the Virtuoso, Marantz lists 3.6 mV output (1 kHz, 5 cm/s), 20 Hz - 20 kHz, channel separation above 30 dB, channel balance below 0.2 dB, 0.66 kOhm impedance, an aluminium cantilever, 6.0 g weight and 2.2 g recommended stylus pressure. Power consumption is 5 W. Dimensions are 440 x 110 x 350 mm (W x H x D) without the tone arm, and weight is 8.9 kg including tone arm and motor.
Engineering and use context
Chassis and platter are made of low-resonance, high-density acrylic, and the platter is 28 mm thick. Its bearing sits inside the centre shaft hole, and bearing oil comes in the box for lubrication about every two years. Solid aluminium three-point support feet carry the chassis.
A non-servo AC motor drives the platter through an endless silicone belt. Marantz uses floating motor mount construction, in which the motor is installed so that it does not touch the acrylic chassis, to avoid chassis vibration. Speed is changed by moving the belt between the lower (33 rpm) and upper (45 rpm) positions on the motor pulley. According to Marantz, motor torque is set to the minimum level to reduce noise.
Its tone arm is a straight anodised aluminium design with a magnetic anti-skating mechanism and a fine adjustable counterweight. The Virtuoso has an ebony base. A Clever Clamp by Souther Engineering, two drive belts (one spare), gloves and a tone arm height adjustment sheet are included. Warranty is five years, with 30 days for cartridge and stylus.
Pairing
A phono stage with an MM input is required, either built into the amplifier or as a separate unit. The headshell is removable, and the arm accepts other cartridges within its rated weight range.
Alternatives
The TT-5005 is a fully automatic Marantz belt-drive turntable with a built-in phono preamplifier.