The TN-180BT-A3 is a three-speed belt-drive turntable from TEAC, the Japanese company founded in 1953. It has a built-in phono equaliser amplifier and a built-in Bluetooth transmitter, so the signal can leave it in three forms - PHONO, LINE or Bluetooth. TEAC offers it in cherry, black and white finishes.
Key specs that matter
Speeds are 33 1/3, 45 and 78 rpm, for LP, EP and SP records. A DC motor drives the 30 cm plastic platter. Wow and flutter is 0.25%, and signal-to-noise ratio is 64 dB or higher (A-weighted, 20 kHz LPF). The tonearm is a static-balance straight type with an effective length of 200 mm and a stylus pressure range of 0 to 5 g. Cartridge output is 3.5 mV (1 kHz, 5 cm/s). At the single pair of chrome-plated RCA sockets the output is 2.4 mV (±3 dB) in PHONO mode and 149 mV (-16.5 dBV) in LINE mode. Bluetooth range is approx. 10 m with the SBC codec. Power consumption is below 1.5 W (below 0.2 W in standby). Dimensions are 420 x 105 x 356 mm (W x H x D), and weight is 4.9 kg.
Engineering and use context
Its cabinet is a single wooden board of high-density MDF rather than a plastic chassis, and TEAC states that it minimises vibration and resonance. A high-torque DC motor is used, and a precision stainless steel spindle in a brass spindle holder maintains the rotation speed. Both the headshell and the counterweight are fixed.
An audio-technica AT3600L is pre-installed at the factory. It is a VM-type cartridge, electrically equivalent to MM, and replacement styli are the ATN3600LC and ATN3600LE. According to TEAC, the groove of 78 rpm SP records is three to four times wider than that of LPs, so the standard stylus should see only limited use on them.
At the end of a side the tonearm returns to its rest automatically, and a manual arm lifter is provided for cueing. The Bluetooth pairing button is located at the tonearm base and illuminates once the link to a speaker or headphones is established. Pairing does not have to be repeated each time. Power comes from an external AC adapter rated for 100 - 240 V. Included are a dust cover with hinges, a rubber sheet, an EP adapter and an RCA audio cable.
Pairing
In LINE mode any line-level input of an amplifier or powered speakers is suitable. In PHONO mode an MM phono input is required. Bluetooth speakers and headphones with the SBC codec connect without a cable.
Alternatives
TEAC's TN-280BT-A3 is the next belt-drive turntable up in the range, also with Bluetooth and a built-in phono equaliser.