Hifiverse

Plattenspieler - Einstein Audio Components THE RECORD PLAYER

Beschreibung, Bilder, technische Daten und Spezifikationen

Einstein Audio Components THE RECORD PLAYER
Bildquelle - (c) Einstein Audio Components

THE RECORD PLAYER is a belt-drive turntable from Einstein Audio Components of Bochum, Germany, with a bamboo main board on a stainless steel frame and an external power supply. Einstein offers a basic version and a deluxe version. The deluxe version adds floating sub-chassis feet and a graphite platter with a heavy stainless steel disc stabiliser. Einstein's May 2023 price list gives EUR 18,000.

Key specs that matter

Height is 110 mm, or 145 mm including the platter, with a width of 560 mm and a depth of 420 mm. Total weight is 24 kg including the external power supply. The outer platter weighs 5.8 kg and has a diameter of 320 mm. Einstein lists the chassis including bearing and three feet at 12,800 g, the motor block with pulley at 2,540 g, the platter weight at 1,120 g, the graphite disc at 450 g and each foot at 760 g. A natural wool felt mat comes with the basic version.

Engineering and use context

A low-speed, low-torque synchronous motor designed for turntables sits in a separate enclosure with three adjustable feet and an extra-heavy decoupling weight. Its pulley is machined from aluminium and contains a clutch that prevents motor cogging, according to Einstein, to avoid wow and flutter. The polished stainless steel inner platter spindle rests on a ceramic bearing ball in a massive bearing block of a copper-based alloy similar to brass. Only its upper and lower ends contact the bearing block, and the groove in the middle also acts as an oil reservoir. Both platters are milled from solid aluminium, joined by an absorbent compound bond.

Bamboo with a vertical cut forms the main board. It is connected to a 6 mm solid stainless steel frame that carries the main bearing and the tonearm mount, and Einstein states that this construction acts as a mechanical filter. On the deluxe version, the floating sub-chassis feet are tuned to a resonance frequency of 4.5 Hz. The graphite platter has a 1-degree slope from the outer to the inner edge and is used with the heavy stabiliser weight.

Pairing

The tonearm mount has an ebony inner plate adjustable with four screws, clamped in an elliptical outer plate of solid aluminium. Rotating the ellipse by 180 degrees switches between a 305 mm tonearm and arms of 229 - 267 mm. Matching Einstein products are THE TONEARM, THE PICK UP cartridge and THE FLASH cable.

Alternatives

The Einstein THE AEROLITH is the brand's other turntable, listed at EUR 100,000 in the May 2023 price list.

Spezifikationen

  • Modellbezeichnung

    THE RECORD PLAYER

  • Geschwindigkeit

    N/A

  • Antrieb

    N/A

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    145 x 560 x 420

  • Gewicht (kg)

    24

  • Offizieller Link