The SL-1210GR2 is a direct-drive turntable from Technics, the hi-fi brand of Panasonic, and a model of the SL-1200/1210 line. It is supplied with a static balance tonearm, a headshell, a PHONO cable and a dust cover.
Key specs that matter
Its motor is a brushless DC motor in direct drive. Speeds are 33 1/3, 45 and 78 rpm, with adjust ranges of ±8% and ±16% and an electronic brake. Starting torque is 2.2 kg·cm, and build-up time is 0.7 s from standstill to 33 1/3 rpm. Wow and flutter is 0.025% W.R.M.S., and rumble is 78 dB (IEC 98A weighted). The aluminium die-cast platter is 332 mm in diameter and weighs approx. 2.5 kg including the rubber sheet. Effective length of the tonearm is 230 mm, overhang is 15 mm and offset angle is 22°. Tracking error angle is within 2° 32' at the outer groove and 0° 32' at the inner groove of a 30 cm record. Arm height adjustment is 0 - 6 mm, and stylus pressure reads directly from 0 to 4 g. The headshell weighs approx. 7.6 g and accepts cartridges of 5.6 - 12.0 g, or 10.0 - 16.4 g with the auxiliary weight, on 12.7 mm (1/2 in) mounting centres with 1.2 mm 4-pin terminal lugs. Output is one pair of PHONO pin jacks with an earth terminal. Dimensions are 453 x 173 x 372 mm (W x H x D), and weight is approx. 11.5 kg.
Engineering and use context
Technics uses a single-rotor, surface-facing, coreless direct drive motor. It is controlled by ΔΣ-Drive, a drive control method based on Technics PWM signal processing that suppresses vibrations from the motor.
A deadening rubber is applied to the entire rear surface of the aluminium die-cast platter. The cabinet has a two-layer construction that unifies BMC and an aluminium die-cast chassis, and it sits on insulators of special silicone rubber with high vibration damping.
On the tonearm, an aluminium pipe is combined with a gimbal suspension construction, and the bearing section uses a cut-processed housing. Power comes from a high-speed switching power supply, and its noise cancelling circuit applies an inverse phase current to remove noise components.
The box also includes the turntable sheet, EP record adaptor, balance weight, auxiliary weight, cartridge spacer, overhang gauge, screw set for cartridge and PHONO earth lead.
Pairing
A cartridge is required. A phono stage with a ground terminal is required, MM or MC to match the cartridge.
Alternatives
The SL-1000RE-S is a higher direct-drive turntable system in the Technics range, with a brass and aluminium platter.