The RT87 is a belt-drive turntable from Fluance of Canada, introduced in June 2026 as part of the Reference Series. It has a dual-plinth MDF chassis, a one-piece carbon fibre tonearm and a cartridge pre-installed at the factory, either an Audio-Technica AT-VM95ML or an Ortofon 2M Blue. List price for the 2M Blue version is USD 799.99 in the United States, and USD 699.99 was quoted for other markets. Finishes are natural walnut, piano white and piano black.
Key specs that matter
Speeds are 33, 45 and 78 rpm, with auto-stop. Wow and flutter is 0.06%, signal-to-noise ratio is 71 dB (weighted) and rumble is below -58 dBA. Speed variation is ±0.08% at 33 rpm, ±0.06% at 45 rpm and ±0.01% at 78 rpm. The acrylic platter is 300 mm in diameter, 22 mm thick and weighs 1.85 kg. Effective arm length is 230 mm, pivot-to-spindle distance 211.5 mm, overhang 18.5 mm and headshell offset 24°. Ortofon quotes the 2M Blue at 5.5 mV, 20 Hz - 20 kHz (+2/-1 dB) and 25 dB channel separation at 1 kHz, with a 47 kohm, 150 - 300 pF load. Dimensions are 160 x 420 x 362 mm (H x W x D), and weight is 9.5 kg.
Engineering and use context
Two MDF plinths, 36 mm below and 21 mm above, are separated by isolators. The motor is on the lower plinth on a 7-point silicone isolation with a decoupling ring, and the tonearm is on the upper plinth. Its DC motor has a servo controller that samples motor speed 500 times per second. Drive is by a round, continuous rubber belt without a joint, 1.85 mm wide and 915 mm long. According to Fluance, the round profile reduces the contact area. The platter is anti-static, and no mat is required.
Fluance specifies the arm as a static balanced, straight design. Its removable headshell uses an H-4 bayonet mount and weighs 7.8 g with wires. Cartridges of 5.0 - 9.5 g and 15 - 21 mm height are accepted, with the 106 g counterweight as standard and 86 g and 134 g weights as options. Anti-skating is set by a hanging weight on a thread, VTA is adjustable over 6 mm, and the cueing lever is CNC-machined metal. Internal wiring is 36 AWG seven-strand Litz wire, twisted in pairs. A hinged dust cover, RCA cable, ground wire, bubble level and VTA hex wrench are included.
Pairing
A phono stage with an MM input is required, as no phono preamplifier is built in. Outputs are 24k gold-plated RCA sockets with a ground terminal. Fluance offers a bundle with its PA10 phono preamplifier for USD 99.99 extra.
Alternatives
The RT85 is the belt-drive turntable below the RT87 in the Fluance Reference Series.