Hifiverse

Plattenspieler - Sharp Electronics RP-TT100

Beschreibung, Bilder, technische Daten und Spezifikationen

Sharp Electronics RP-TT100
Bildquelle - (c) Sharp Electronics

The RP-TT100 is a fully automatic belt-drive turntable with Bluetooth output from Sharp, and it marked the brand's return to record players. It was unveiled at IFA 2025 in Berlin and went on sale in Europe in October 2025 at EUR 199, with a UK price of GBP 179.

Key specs that matter

Speeds are 33 1/3 and 45 rpm, and record size selection covers 17 cm and 30 cm discs. A pre-installed Audio-Technica AT-3600LA moving magnet cartridge and an aluminium platter with a rubber mat are supplied. Wow and flutter is below 0.3% (WRMS) and rumble is below -40 dB. Signal-to-noise ratio is above 55 dB in phono mode and above 40 dB in line mode, channel separation is above 20 dB and channel balance is within 2 dB. Bluetooth is version 5.4 with A2DP, AVRCP and the SBC codec. Power consumption is 2.6 W with the platter rotating and below 0.3 W in standby. The matt black ABS deck measures 381 x 102 x 359 mm (W x H x D) and weighs 2.8 kg.

Engineering and use context

Its fully automatic tonearm gives one-touch playback, fast-forward, rewind and repeat. After the record size is selected, the tonearm descends to the correct starting position by itself. Skip buttons move it one step forward or back, or keep it moving while held. All functions are available from the flush-mounted digital controls on the deck or from the supplied remote.

On the rear panel, a PREAMP switch selects phono or line output on the RCA sockets, and a GAIN SELECT switch has Low, Mid and High positions. A ground terminal is provided for the connection to an external device. A USB-C port sends PCM at 48 kHz/16-bit stereo to a PC for recording, and Sharp notes that additional software may be required.

Power comes from an external 12 V DC, 1 A adapter for 100 - 240 V mains, supplied with EU and UK plug inserts. After about 15 minutes of inactivity the deck switches to standby. The stylus ships under a protective cover. In the box are the remote with batteries, a 45 rpm adapter, an RCA cable with grounding wire, a spare drive belt, a stylus brush and a tinted dust cover.

Pairing

In PHONO position, an amplifier with a moving magnet phono input is required. In LINE position, the RP-TT100 connects to an AUX or line input or directly to active speakers.

Alternatives

The RP-TT95 is the other automatic turntable from Sharp, covered by the same instruction manual as the RP-TT100.

Spezifikationen

  • Modellbezeichnung

    RP-TT100

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    Fixed

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    S-Type

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    Audio Technica AT-3600LA

  • Plattenteller

    aluminium

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    381 x 102 x 359

  • Gewicht (kg)

    2.8

  • Offizieller Link