Hifiverse

Plattenspieler - Mark Levinson № 5105

Beschreibung, Bilder, technische Daten und Spezifikationen

Mark Levinson № 5105
Bildquelle - (c) Mark Levinson

The № 5105 is a belt-drive turntable from Mark Levinson, the HARMAN-owned American brand, and the only turntable in its range. It was developed together with Acoustic Signature of Germany and is designed and handcrafted in the USA. Its styling follows the 5000 series electronics. A № 5105 MC version comes factory calibrated with an Ortofon Quintet Black moving coil cartridge. The US price was about USD 8,500.

Key specs that matter

Speeds are 33 1/3 and 45 rpm, selected by front panel buttons. The platter is solid aluminium, 299 mm in diameter and 34 mm thick, and weighs 6 kg. Effective tonearm length is 10 in., mounting distance is 237.8 mm and overhang is 16.2 mm. The aluminium chassis measures 438 x 380 x 50 mm. Overall dimensions are 438 x 395 x 154 mm, and weight is 34 kg. Outputs are RCA with a separate ground terminal.

Engineering and use context

Machined from a single billet, the nearly 2 in. thick plinth is solid brushed aluminium. Each of its three adjustable aluminium feet has a mixed-material internal suspension, and a bubble level is integrated. The platter has its underside coated with resonance damping material. It sits on a grounded hardened steel axle running in precision ball bearings mounted with a pre-load force. An oil-free bearing bottom of composite material with integrated lubrication and maintenance-free sintered brass bushings complete the main bearing.

Drive comes from an isolation-mounted 12 V synchronous motor. Its control signal is digitally generated, and Mark Levinson says the all-digital output stage produces nearly no heat and therefore no temperature drift. At start-up the speed rises slowly to minimise wear on the belt. A wide-range power supply for 90 - 260 V AC is built in, and four AC cables are included.

The custom tonearm has a high-gloss black carbon fibre tube fixed to a solid aluminium headshell with an integrated finger lift. Its two-axis aluminium gimbal gives low-friction movement in both planes. VTA is set with a locking screw on the armboard and azimuth with a locking screw in the headshell. A weight-and-string anti-skating device is mounted on the arm pivot.

The front panel is one-inch bead-blasted, black-anodised aluminium around a tinted glass display. Supplied with it is an hourglass-shaped record weight of machined aluminium, mass-loaded with solid brass.

Pairing

A phono stage is required, and with the № 5105 MC it must have an MC input. The recommended companions are the № 5206 preamplifier and the № 5302 power amplifier.

Alternatives

Mark Levinson has no other turntable, so the № 5105 has no alternative within the brand.

Spezifikationen

  • Modellbezeichnung

    № 5105

  • Geschwindigkeit

    33/45

  • Antrieb

    N/A

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    154 x 395 x 438

  • Gewicht (kg)

    N/A

  • Offizieller Link