Hifiverse

Plattenspieler - J.Sikora INITIAL MAX WHITE

Beschreibung, Bilder, technische Daten und Spezifikationen

J.Sikora INITIAL MAX WHITE
Bildquelle - (c) J.Sikora

The Initial Max White is the white version of the Initial Max from J.Sikora of Lublin, Poland. Compared with the basic Initial, it adds an extra plinth and a second tonearm position. The Initial line is the first of the three J.Sikora lines, below Standard and Reference. It is a belt-drive turntable with a Delrin platter, supplied without tonearm and cartridge.

Key specs that matter

Speeds are 33 and 45 rpm. Total weight with the plinth is 51 kg, and the Delrin platter weighs 4 kg. Materials are aluminium, stainless steel and cast iron. An inverted bearing with a ceramic ball carries the platter, which is driven by a rubber belt from two DC motors. Dimensions with the plinth are 620 x 350 x 296 mm. The extra plinth alone weighs 18 kg and measures 620 x 350 x 75 mm.

Engineering and use context

Unlike the basic Initial, the Max version comes with clamp, glass mat and power supply as standard. The J.Sikora Basic Power Supply runs from 230 V or 115 V mains and has a 24 V output.

J.Sikora describes all of its turntables as mass loaders with the same bearings, motors and drivers in every line. According to the founder, the upper lines lose resonance through metal layers, while the Initial is the only model in which this layering was dropped for cost reasons, with special cutouts in its base used instead.

Pairing

One or two tonearms and cartridges are required. A phono stage matched to each cartridge is required, or a phono preamplifier with two inputs for two arms. J.Sikora's own tonearms are the KV9 and KV12.

Alternatives

The Standard Max White is the next J.Sikora model, with a white or black 18 kg Delrin and cast iron platter, two DC motors and a total weight of 83 kg.

Spezifikationen

  • Modellbezeichnung

    INITIAL MAX WHITE

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Delrin

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    620 x 350 x 296

  • Gewicht (kg)

    51

  • Offizieller Link