The Initial Line is the entry model of the three J.Sikora turntable lines, below Standard and Reference. J.Sikora, based in Lublin, began producing and selling turntables in 2007. This belt-drive deck is supplied without tonearm and cartridge and is offered in silver or black.
Key specs that matter
Speeds are 33 and 45 rpm. Total weight is 28 kg, of which the Delrin platter accounts for 4 kg. Chassis materials are aluminium, stainless steel and cast iron. The bearing is an inverted type with a ceramic ball, and drive is by one DC motor and a rubber belt. An armboard for one tonearm is included. Dimensions are 440 x 330 x 160 mm.
Engineering and use context
J.Sikora describes all of its turntables as mass loaders that share the same bearings, motors and drivers. According to the founder, the upper lines lose resonance through metal layers, and Initial is the only model in which this layering was dropped for cost reasons, with special cutouts in its base used instead. He also notes that its platter is smaller than in the other lines.
Clamp, glass mat and power supply are optional on the Initial Line. Among the J.Sikora power supplies, the Basic model accepts 230 V or 115 V and delivers 24 V, in a 100 x 100 x 190 mm case.
Pairing
A tonearm and a cartridge are required. A phono stage matched to the chosen cartridge is required. J.Sikora's own tonearms are the KV9 and KV12.
Alternatives
The Initial Max Line is the larger J.Sikora version, with two DC motors, two tonearm positions, an extra plinth and a total weight of 51 kg.