The Helix One Mk3 is a belt-drive turntable from Dohmann Audio of Cheltenham, Victoria, Australia, designed by Mark Dohmann, who earlier played a central part in building the Continuum Caliburn. Dohmann launched the original Helix One at Munich High End in May 2015, the Mk2 was made from February 2019 to September 2022, and the Mk3 was launched in October 2022. Mk1 and Mk2 decks can be upgraded to Mk3, and the Mk3 to vacuum specification. The UK price is GBP 64,998.
Key specs that matter
Factory default speeds are 33.33 and 45.15 rpm, calibrated over 130,000 times per second, with 78 rpm and custom speeds on request. Two armboards take two tonearms up to 292 mm at the same time, and some longer arms are supported on enquiry. Its fully adaptive power supply accepts 100 - 250 V AC, 50/60 Hz. Dimensions are 600 x 480 x 250 mm (W x D x H) without clamp or tonearm, and weight is 54 kg for the main chassis and 22 kg for the PowerBase, 76 kg in total. Resonance of the MinusK suspension is 0.5 Hz vertical and 1.5 Hz horizontal. Black, Sterling Silver, Graphite and Aurelian Gold finishes all come with a carbon fibre top plate.
Engineering and use context
A MinusK negative stiffness mechanism (NSM) is integrated into the chassis and isolates vibrations up to 100 Hz. Above that, Dohmann's mechanical crossover uses constrained layer plates for mid-band vibrations, and higher frequency energy is dissipated in the PAR system. The 120 mm plinth is CNC-machined aircraft grade aluminium and structural alloy, close to 50 kg assembled, with a laminated glass plate for ballast.
Drive comes from a decoupled Swiss-manufactured single spindle high-torque motor with zero cogging and up to 100 W available, under a digital closed loop servo of more than 16-bit resolution that reads 120,000 rotor positions per revolution. Two high damping O-ring belts reduce static and vibration. Each 15 kg platter has four layers - a fibre-reinforced elastomer mat, an upper composite sandwich of 5000 series aluminium and a 10 mm resin matrix, an air gap, and a lower aluminium shell around an Al 5083 and silicon carbide metal matrix composite. An Edge Damping Ring damps the platter and record edge. Its maraging steel spindle runs on a ceramic ball and a tungsten carbide thrust pad.
Both Mk3 Advanced Composite Armboards are floating and can be removed with arms mounted. The PowerBase holds the power supply, motor control software, RF absorption, a suspension stabiliser for record changes, lighting control and power filtration.
Pairing
The two armboards allow two tonearms at once, each to its own phono input. Dohmann builds custom armboards for other tonearms on request.
Alternatives
The Helix Two Mk3 is the compact Dohmann turntable with one tonearm position.