The Grandioso T1 is the first turntable in the history of Esoteric, created for the 35th anniversary of the Japanese company. It consists of three separate units - a main unit, a motor unit and a power supply unit. The T1 comes with the TA-9D dynamic balance tonearm, and the T1/AL version without an arm requires an optional arm base kit.
Key specs that matter
Speeds are 33 1/3 and 45 rpm, adjustable by ±12% in 0.1% steps. Wow and flutter is 0.06% or less (W.R.M.S.). A BNC clock input accepts 10 MHz (±10 ppm) into 50 ohms. Its TA-9D tonearm has an effective length of 245 mm, overhang of 15 ±2 mm, a tracking force range of 0 - 5 g in 0.25 g steps and a VTA range of 0 - 10 mm. The base unit measures 497 x 215 x 436 mm and weighs 17 kg, the platter is ø315.4 x 103 mm at 19 kg, the motor unit is 180 x 137 x 450 mm at 9 kg, and the power supply unit is 445 x 131 x 447 mm at 18 kg.
Engineering and use context
Esoteric MagneDrive (Japan Patent No. 6501130) is a non-contact drive using magnetic force. At the end of the motor is a magnetic driver shaped like an idler, its sides magnetised with alternating S and N poles. The platter is non-magnetic aluminium, with a soft-iron induction wheel mounted on its underside. Speed is regulated by direct control of the motor current waveform with a high-precision processor instead of a servo, and the VCXO motor driver uses a 10 MHz clock. Isolated from the main unit, the motor unit sits on a 6 mm thick brass bottom chassis. A micrometer dial on its front changes the driver-to-platter distance, and at +1.0 mm the transmission torque falls by 57%. No drive belt needs replacing.
Machined from an aluminium block, the 19 kg platter has the Magne-Float system, which cuts the bearing load to approximately 4 kg. An inverted bearing brings its fulcrum closer to the record surface. The chassis is a wood layer between thick aluminium layers, with the arm on the top layer and the spindle and feet on the bottom one. Each isolation foot combines coil springs with damper resin, with a damping time of about 0.5 s. The TA-9D is based on the IKEDA IT-345, with a stainless steel arm pipe inlaid with brass and aluminium and 6N + 4N copper internal wiring. Inside the power supply unit are an over-sized toroidal transformer for the motor and an R-core transformer for operation. A WASHI paper sheet covers the platter.
Pairing
A cartridge is required, with a cartridge and headshell weight of 6 - 38.5 g on the TA-9D. Optional arm base kits allow up to three tonearms, including SME, Graham Phantom, SAEC WE-4700, Reed and Durand Tosca models. The Grandioso G1X master clock generator connects to the clock input.
Alternatives
The Esoteric T-01 is the brand's other analogue turntable.