The G 2000 R is the belt-drive turntable of the T+A R series and a further development of the earlier G 1260 R. T+A offers it with a modified Clearaudio High-End Carbon tonearm and its MC 2 moving-coil cartridge, or without arm and pickup. In 2017 UK prices were GBP 4,111 for the bare deck, GBP 5,205 with arm and cartridge and GBP 545 for the phono module.
Key specs that matter
Principle is a belt-drive mechanism in a heavy chassis with a structural sound absorber and resonance isolation. A crystal-controlled synchronous motor with DSP-controlled optimisation of the motor coil voltage curve drives the platter. Speeds are 33 1/3 and 45 rpm, electronically switched. Wow and flutter is ±0.02% and rumble is 82 dB. Its platter is pressure-cast aluminium weighing 3.8 kg, with a silicone rubber mat. The MC 2 cartridge has 0.75 mV output, 30 dB channel separation (1 kHz), a 20 Hz - 45 kHz frequency response (-3 dB), 100 ohms terminal impedance, 9 µm/mN compliance, a Micro Line stylus, 20 mN (2 g) tracking force and a weight of 8 g. Mains supply is 100 - 240 V, 50 - 60 Hz, 40 W. Dimensions are 82 x 460 x 380 mm for the body and 160 x 460 x 380 mm overall (H x W x D), and weight is 14 kg.
Engineering and use context
An accurately machined pulley on the motor drives the platter through a special ground rubber belt. Start-up of the heavy platter is controlled through motor torque, and T+A states that the DSP motor control removes dependence on mains frequency and voltage fluctuations. For a speed change the belt is never moved by hand.
Inside the solid MDF case sit all sub-assemblies, and the body is mounted on four shock absorbers. External aluminium parts are of sandwich construction, and the aluminium cover is bonded to the body. Each platter is fine-turned and mounted on an inner zinc platter for isolation. After the platter shaft is press-fitted, the zinc platter is machined again on CNC machines. Both the hardened, polished steel shaft and the plain brass bush are made to a tolerance of 5 µm. Finishes are silver anodised aluminium (43) and black anodised aluminium (42), brushed.
Pairing
The recommended phono amplifier is the PHE-G R MC module, installed in the chassis at the factory only. Without it, a phono stage with an MC input is required. R2-Link connects the deck to R series amplifiers such as the PA 2000 R and PA 2500 R for automatic power-on. The H 2000 cover is an optional accessory.
Alternatives
T+A has no other turntable in its catalogue, so the G 2000 R has no alternative from the same brand.