Hifiverse

Plattenspieler - European Audio Team (EAT) FORTISSIMO

Beschreibung, Bilder, technische Daten und Spezifikationen

European Audio Team (EAT) FORTISSIMO
Bildquelle - (c) European Audio Team (EAT)

The Fortissimo is a belt-drive turntable from European Audio Team (E.A.T.) in the Slovak Republic. Like the Forte, it combines a separate sub-chassis with a mass-loaded turntable and has a stand-alone motor unit. It is supplied with the C-Note 12-inch tonearm, and the F-Note tonearm and the Fortissimo Base are offered as options.

Key specs that matter

Speeds are 33.33 and 45.11 rpm, with electronic speed change under microprocessor control. Speed variance is ±0.07% and wow and flutter is ±0.007%. Signal-to-noise ratio is -73 dB (electrical noise). The 400 mm platter weighs more than 22 kg. For the C-Note 12-inch E.A.T. gives an effective length of 304.8 mm, an effective mass of 19.2 g, an overhang of 13.2 mm and a downforce range of 0 - 3.0 g. A universal switch-mode power supply (18 V DC/1.33 A) is used, and power consumption is 8.5 W maximum and 0.5 W in standby. Dimensions are 710 x 250 x 440 mm (W x H x D), and the turntable weighs 68 kg.

Engineering and use context

Its platter has 12 brass inserts plus one top brass insert under the vinyl top plate for added weight and speed stability. It consists of a soft alloy part and a harder alloy part to reduce energy flow, and the soft part holds the neodymium magnets of the magnetic suspension. Sorbothane damping is built into the platter.

The bearing is inverted, with an oversized polished shaft. A new bearing block in chrome alloy is rated to withstand the additional energy of the heavier platter. Its spindle has a Movic coating, and E.A.T. quotes a friction coefficient six times lower than on previous spindle versions. A ceramic ball on top runs against a Teflon plate as bearing mirror, and with most of the mass carried by the magnets the bearing pressure is low and adjustable.

In the motor unit, two silent-running AC motors work in a dual motor design, and an electronic circuit generates clean AC for them. That unit is heavy and decoupled, with a metal and MDF sandwich, and the drive belts are silicone strings. On the C-Note, cardan and unipivot bearings are immersed in damping fluid.

E.A.T. describes the optional F-Note as a high-mass tonearm with a low-friction bearing. The Fortissimo Base acts as a sub-chassis and uses six new magnetic feet sized for the weight of this turntable.

Pairing

With the C-Note, cartridges of 5 - 9 g balance without the counterweight insert and 8.5 - 13 g with it. The F-Note is matched by E.A.T. to its Jo No. 8 cartridge. A phono stage matching the cartridge is required.

Alternatives

The Fortissimo S is the smaller configuration of the same turntable.

Spezifikationen

  • Modellbezeichnung

    FORTISSIMO

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    F-Note (Optionally)

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    It consists of two parts. The first part uses a soft alloy, the second part, a harder one. This reduces energy flow.

  • Motor

    AC

  • Gleichlaufschwankungen (%)

    0.007

  • Signal-Rausch-Abstand (dB)

    -73

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    710 x 250 x 440

  • Gewicht (kg)

    68

  • Offizieller Link