Hifiverse

Plattenspieler - MoFi Electronics FENDER X MOFI PRECISIONDECK LIMITED EDITION

Beschreibung, Bilder, technische Daten und Spezifikationen

MoFi Electronics FENDER X MOFI PRECISIONDECK LIMITED EDITION
Bildquelle - (c) MoFi Electronics

The Fender x MoFi PrecisionDeck is a limited-edition belt-drive turntable from MoFi Electronics, made in collaboration with Fender and based on MoFi's UltraDeck. Production is limited to 1,000 units, each individually numbered and badged with a nameplate modelled on the metal serial-number plates of Fender guitars. Two configurations were listed - with the MasterTracker cartridge at USD 3,495 and with the StudioSilver MC at USD 3,995. Fender's link with turntables dates from 1945, when Leo Fender co-designed and patented a record changer/turntable with Doc Kauffman and Clifton Abbott.

Key specs that matter

Motor is a 300 rpm AC synchronous unit, and speeds are 33 1/3 and 45 rpm. The platter is 3.1 kg (6.8 lb) Delrin, 33 mm (1.3 in.) thick. Wow and flutter is 0.017% - 0.025%, and signal-to-noise ratio is 74 dB. The 10-inch Ultra tonearm is a straight aluminium arm with gimbaled bearings, 18 mm overhang and a 22.8-degree offset angle (±2 degrees adjustable), for cartridges of 5 - 10 g. Dimensions are 527 x 152 x 394 mm (20.75 x 6 x 15.5 in.), and weight is 11.6 kg (25.5 lb).

Engineering and use context

Its plinth is swamp ash, the same wood Fender uses for Precision Bass guitars, optimised by Fender for low resonance. Fender Master Builder Yuriy Shishkov developed the shape, and each plinth is sourced, milled and finished by Fender before it goes to the MoFi factory in Michigan for assembly. The tricolour sunburst is the urethane finish Fender developed in the 1950s for the Precision Bass, Stratocaster and Telecaster, hand-painted by Fender on every deck.

A Delrin pulley with two steps sets the speed, with the belt on the top step for 33 1/3 rpm and on the bottom step for 45 rpm. Damping materials decouple the motor from the rest of the turntable to keep motor vibration away from the platter and stylus. Delrin is a DuPont polymer, and MoFi cites its highly crystalline structure as an impedance match to vinyl. The inverted bearing combines hardened steel, bronze and sapphire.

MoFi makes the Ultra tonearm in the USA. Its ball bearings give low friction in the vertical and horizontal planes, and the internal wiring is by Cardas Audio, terminated in gold-plated RCA connectors. Arm height (VTA) and azimuth are adjustable, and anti-skating uses a hanging weight with four notches for cartridge weights. With the MasterTracker pre-installed, tracking force, VTA and azimuth are factory-set. Anti-vibration feet developed with Harmonic Resolution Systems are included, along with a dust cover, RCA interconnects and a stylus brush.

Pairing

A phono stage is required. The StudioSilver MC configuration requires a phono stage with an MC input.

Alternatives

The MoFi UltraDeck is the standard turntable this edition is derived from, with a conventional plinth.

Spezifikationen