The drive is a belt-drive turntable from genuin audio of Germany, developed by Helmut Thiele, who draws on 40 years as a designer and developer. Compared with the single-motor previous model, the current drive uses three motors. It can be supplied with the genuin audio point tonearm, the sting MC cartridge and an integrated version of the pearl phono preamplifier.
Key specs that matter
Three synchronous motors with a specially developed motor controller drive an aluminium sub-platter. Speeds are 33 1/3 and 45 rpm, selected on an illuminated keypad, with fine adjustment by potentiometers at the rear of the plinth. Platter and sub-chassis are POM. The bearing is a 10 mm plain bearing with a tungsten carbide ball on a Delrin plate. Suspension is by three self-damping torsion springs, tunable in height and resonance frequency and set at the factory to 4.5 - 5 Hz. The tonearm board is a 15 mm acrylic plate. Outputs are balanced XLR or unbalanced RCA, and power comes from an external stabilised supply.
Engineering and use context
All three motors are encapsulated, and each drives the sub-platter through its own round belt and POM pulley. The pulleys are arranged at exactly the same distance from the sub-platter, so that the platter bearing carries no lateral load. Motor drive comes from a special amplifier circuit that receives its control information from a central high-precision frequency generator.
Each torsion bar spring element has a rotatable base plate on a multiplex mount and two spring plates lying on top of each other. Friction between the plates during torsion damps vibration, and a rubber element connects the spring arm to the sub-chassis. All three are tuned to an identical resonance frequency, and their height can be reset from the underside for heavy record clamps.
Its base plate is aluminium, the motor and spring mounts are multiplex, and the chassis base sits on three Thixar damping feet. The housing is a POM sandwich with side panels of CDF, the hardest variant of MDF, in real wood veneer, an aluminium front in silver or black and an acrylic glass top. On the armboard the tonearm base is bolted, while the remaining surface is decoupled and damped. A LEMO socket in the armboard connects the tonearm cable to the outputs. The 10-inch point arm has an 18 mm base tube and is fixed with a thrust washer and an M8 screw.
The integrated pearl can be ordered or retrofitted at any time. It accepts MM, MI and MC cartridges, and its RIAA, Decca and Columbia curves can be switched on the keypad during playback.
Pairing
Without the phono option, a phono stage with XLR or RCA inputs is required. With the integrated pearl, a line-level input is required.
Alternatives
The drive is the only turntable in the genuin audio range.