Hifiverse

Plattenspieler - Denon DP-3000NE

Beschreibung, Bilder, technische Daten und Spezifikationen

Denon DP-3000NE
Bildquelle - (c) Denon

The DP-3000NE is a direct-drive turntable from Denon and the top model of the brand's current turntable range. It has manual operation, three speeds and Denon's original static balance S-shape tonearm. The plinth is finished in dark ebony natural wood veneer, with a metal platter, tonearm and controls. A cartridge is not supplied, and the deck can be used with any compatible MM or MC cartridge. Denon released its first direct-drive turntable, the DN-302F for broadcast studios, in 1970.

Key specs that matter

Drive system is direct, with a 16-pole, 12-coil brushless motor and PWM Vector control. Speeds are 33 1/3, 45 and 78 rpm. The aluminium diecast platter is 305 mm in diameter, with a platter inertia of 382 kg/cm2, and runs on a miniature steel ball bearing. Wow and flutter is less than 0.06% (JIS), speed tolerance is less than ±0.3% and rumble (S/N ratio) is over 70 dB. Arm length is 244 mm, overhang is 14 mm, offset angle is 20.5° and tracking error angle is 2.5° max. Suitable cartridge weight is 4 - 16 g, or 14 - 26 g with the sub weight. Stylus force adjustment is 0 - 2.5 g per rotation, anti-skating adjustment is 0 - 3 g and horizontal and vertical sensitivity is 30 mg. Dimensions are 500 x 394 x 185 mm (W x D x H), and weight is 18.5 kg.

Engineering and use context

Motor control uses Space Vector PWM (SV-PWM), an algorithm that controls the PWM module powering the motor. According to Denon, SV-PWM greatly reduces harmonics in the motor, which can cause overheating and torque fluctuations, and keeps voltage and frequency output stable through continuous feedback of the rotation speed. Power comes from an internal switch mode power supply (SMPS) for AC 100 - 240 V, 50/60 Hz, with no linear transformer and no external power brick.

Its S-shape tonearm has an aluminium headshell, and the newly developed arm height adjustment of 0 - 9 mm at the tonearm base sets the vertical tracking angle. Denon states that the headshell matches any existing Denon MC cartridge. Adjustable insulator feet isolate the deck from vibration picked up from the supporting surface and level the platter. A removable dust cover, platter mat, RCA and ground cables, an overhang gauge, cartridge mounting screws in three lengths, two 1 mm cartridge spacers, the counter weight, the sub-counter weight and a Denon EP adapter are in the box.

Pairing

A phono stage is required, with an MC input when an MC cartridge is installed. Heavier cartridges require the supplied sub weight.

Alternatives

Denon's DP-400 is a belt-driven turntable with semi-automatic operation.

Spezifikationen

  • Modellbezeichnung

    DP-3000NE

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Direct-drive

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Aluminum diecast

  • Motor

    AC

  • Gleichlaufschwankungen (%)

    0.06%

  • Signal-Rausch-Abstand (dB)

    >70

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    500 x 394 x 185

  • Gewicht (kg)

    18.5

  • Offizieller Link

Weitere Komponenten