Hifiverse

Plattenspieler - Clearaudio CONCEPT

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio CONCEPT
Bildquelle - (c) Clearaudio

The concept is a belt-drive turntable package from Clearaudio of Erlangen, Germany. It comes with the concept tonearm and a Clearaudio concept MM or concept MC cartridge, and all parameters, including tracking and anti-skating force, are pre-adjusted at the factory. A concept wood version was offered alongside the standard chassis, and in the 2018 edition the Satisfy Kardan Aluminium tonearm was available as an alternative to the concept arm.

Key specs that matter

Speeds are 33 1/3, 45 and 78 rpm, and in the 2018 edition 78 rpm is optional. Speed variation is ±0.04 %. The platter is POM, 30 mm thick. Drive comes from a decoupled DC motor with low-noise bearings. The tonearm has an effective length of 239.31 mm (9 inches), a pivot-to-spindle distance of 222 mm, an overhang of 17.31 mm and an offset angle of 24.36 degrees, and accepts cartridges of 2.5 - 17 g. Dimensions are approx. 420 x 350 x 125 mm (W x D x H) with the tonearm, and weight is approx. 7.5 kg including motor, tonearm and cartridge.

Engineering and use context

Its main bearing is a polished and tempered steel shaft in a sintered bronze bush, running on a Teflon mirror. The drive belt runs around the sub-platter and the motor pulley. In the 2018 edition the resonance-optimised chassis is made of medium-density wood fibre or pressure-formed solid wood, with an upper layer of satined plastic compound. Three speed setting controls on the rear panel allow fine adjustment of each speed, although the motor is factory-set.

The concept tonearm uses a friction-free magnetic bearing. Its Clearaudio Directwire Plus signal cable is wired straight from the arm, and the arm base follows the Linn/Clearaudio mounting standard. The concept MM cartridge has an output of approx. 3.3 mV and an aluminium cantilever, and the concept MC approx. 0.42 mV and a boron cantilever. Recommended tracking force for both is 2.2 g. Height-adjustable spiked feet with lock screws level the chassis.

Power comes from an external supply rated 100 - 240 V input and 12 V DC output. A level gauge, an allen key, a drive belt, the power supply with EU, UK and US adaptors and bearing oil are included.

Pairing

A phono stage is required, with an MM input for the concept MM or an MC input for the concept MC. The tonearm cable terminates in RCA plugs.

Alternatives

The concept Signature is Clearaudio's successor turntable, with a Tacho-Speed-Control that monitors platter speed.

Spezifikationen

  • Modellbezeichnung

    CONCEPT

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Synthetic material with high-density and excellent dimension

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    420 × 350 × 125

  • Gewicht (kg)

    7.5

  • Offizieller Link