The Beogram 4000c Saint Laurent Rive Droite Edition is the fifth joint creation of Bang & Olufsen and Saint Laurent, partners since 2017, and was presented in March 2025. Under the direction of Anthony Vaccarello, ten original Beogram 4000 Series turntables were restored in Struer, Denmark, and transformed into Beogram 4000c recreated editions. The source design dates from 1972 and is the work of Jacob Jensen. Its price was set at EUR 30,000.
Key specs that matter
Belt drive with a controlled synchronous motor gives 33 1/3 and 45 rpm with automatic speed selection and a speed control range of ±3% on a two-pointer dial. Wow and flutter is <0.12% (AES6-2008), typically 0.07%, and speed drift is <0.15% (IEC-386), typically 0.07%. Rumble (DIN 45 539, with cartridge) is >50 dB, typically 60 dB. Horizontal tracking error is <0.04°. The Soundsmith SMMC20CL cartridge has a nude 0.12 mm square contact line stylus, 1.3 g recommended tracking force, 28 µm/mN compliance and 0.32 mg effective tip mass. RIAA gain is 41.8 dB ±0.2 dB at 1 kHz, with maximum output >8.0 V peak and deviation from the RIAA curve <±1.0 dB (20 Hz - 20 kHz), typically ±0.5 dB. Dimensions are 490 x 100 x 380 mm (W x H x D), and weight is 12 kg.
Engineering and use context
Like the cutter head on a lathe, the tangential tonearm moves in a straight line across the disc. A detection system in the arm responds to angular deviation, and the stylus moves about 0.1 mm before the detector engages the tracking motor. Lift is electronic, and pickup movement and record size detection are automatic. A tachometer built into the drive motor governs speed.
Soundsmith makes the SMMC20CL as a variable reluctance design based on the Bang & Olufsen Micro Moving Cross construction, with a solid sapphire cantilever. Its tip mass is lower than the 0.5 mg of the original MMC 4000. Recommended tracking force was raised from 1 g on the Beogram 4002 to help track recent recordings with higher modulation velocities and displacements. Each unit comes with a final verification sheet of measurements.
Every piece sits in a solid ziricote wood case with aluminium details carrying an etched joint logo, and each is individually numbered.
Pairing
The RIAA preamplifier is built in, so a line-level input is required. Its power supply is set to 110/130 or 220/240 V and does not switch automatically.
Alternatives
The Beogram 4000c Recreated Limited Edition is the standard version of the same tangential turntable.