Hifiverse

Plattenspieler - Brinkmann Audio Balance 33rd Anniversary Edition

Beschreibung, Bilder, technische Daten und Spezifikationen

Brinkmann Audio Balance 33rd Anniversary Edition
Bildquelle - (c) Brinkmann Audio

The Balance 33rd Anniversary Edition is a limited two-arm version of the Balance belt-drive turntable from Brinkmann Audio of Germany. Brinkmann states that the Balance has been in continuous production since May 1985 and that this edition is inspired by Leica rangefinder cameras. Production is limited to 33 sequentially numbered units, from 01/33 to 33/33. In the US the price was USD 64,990 with one tonearm, while Brinkmann itself does not publish a price.

Key specs that matter

Drive is by a precision ground round belt from the Sinus 4-phase, 12-pole motor. Speeds are 33 1/3 and 45 rpm, selected by a switch, with ±10% fine adjustment by trim pot. Wow and flutter is 0.07% linear and 0.035% weighted (DIN 45507). Rumble is -66 dB with the DIN 45544 test record and -70 dB with a measuring adapter. Its platter weighs 18 kg, with a diameter of 316 mm and a height of 90 mm. Dimensions are 550 x 400 x 140 mm (W x D x H) and weight is 35 kg, against 33 kg for the one-arm Balance.

Engineering and use context

Platter and chassis are made of resonance-optimised, anodised aluminium alloy, and the platter surface is planar polished crystal glass in a recessed mounting. Brinkmann uses a hydrostatic, zero-maintenance bearing with a heater. Its heater keeps the bearing at a stable temperature so that it can be made to tighter tolerances, and has its own solid-state power supply. In the Sinus motor, 4-phase drive circuitry replaces the usual two-phase design to reduce cogging and gives 12 pulses per revolution. Its nickel-plated steel body has a rotating mass of 500 g and acts as a flywheel. The motor runs from the RöNt II tube power supply with selected NOS Mullard tubes of UK origin.

One base carries the supplied Brinkmann 12.1 tonearm and an Anniversary engraving, and the second is prepared for an arm of the customer's choice. A collar system allows quick arm exchange and adjustment. The 12.1 has an effective length of 305.6 mm, an overhang of 13.6 mm, a dynamic mass of about 14 g and infinitely variable azimuth. Every unit stands on an HRS Reference-series isolation base developed for it, effective from subsonic frequencies to 40 kHz and engraved with the Brinkmann and HRS logos. Also included are a screw-down record clamp, tools, flight cases and a coffee-table book signed by Helmut Brinkmann on the 33-year history of the Balance.

Pairing

A phono stage is required. The 12.1 accepts cartridges weighing 4 to 16 g. Its second arm base allows a second tonearm with its own cartridge.

Alternatives

The Brinkmann Spyder is a belt-drive turntable with the same heated bearing and Sinus motor and room for up to four tonearms.

Spezifikationen

  • Modellbezeichnung

    Balance 33rd Anniversary Edition

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    Fixed

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    planar polished crystal glass surface

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    550 x 400 x 140

  • Gewicht (kg)

    35

  • Offizieller Link