The Arco 40 Anniversary Turntable is a belt-drive turntable that SteinMusic, the German company founded in 1982, made for its 40th anniversary. Production is limited to 20 units, each handmade in Germany. The name comes from music, where arco means playing with the bow, and on this turntable the tonearm tube is made from a cello bow. Its price is EUR 5,800.
Key specs that matter
Speeds are 33 1/3 and 45 rpm. Drive is by belt from a Maxon motor made in Switzerland, governed by a dedicated, separate control unit. The belt is a thin, waxed and silver-plated nylon thread. Both plinth and platter are made of 19-layer plywood, aged for more than 25 years, with 2 mm cherry veneers. The platter is a wood and metal sandwich with a 2.5 mm metal plate inside and weighs 2,000 g. It runs on a dual bearing. A 10-inch unipivot tonearm is mounted.
Engineering and use context
SteinMusic states that wood damps vibration. In the platter the wood is joined by the metal plate. According to SteinMusic, the dual bearing runs with so little friction that the platter keeps turning for more than four minutes after switching off at 33 1/3 rpm.
SteinMusic describes the cello bow as a material chosen over generations for vibration and sound. Its arm is supported at a single point on a precision balance wheel from watchmaking. A handmade tonearm cable is used, made from copper more than 50 years old and shielded by a copper braid. It has no plastic insulation.
The Arco 40 is supplied with its 10-inch tonearm and the separate motor control unit. No cartridge is included.
Pairing
A cartridge and a phono stage are required. SteinMusic suggests its own Aventurin 6 MC cartridge with the Stateline Phono 2 Signature phono preamplifier. A phono stage with an MC input is required for that cartridge. Outputs are RCA only.
Alternatives
SteinMusic has no other turntable in its current range.