Hifiverse

Plattenspieler - Well Tempered Lab AMADEUS 254 GT

Beschreibung, Bilder, technische Daten und Spezifikationen

Well Tempered Lab AMADEUS 254 GT
Bildquelle - (c) Well Tempered Lab

The Amadeus 254 GT is a belt-drive turntable from Well Tempered Lab of Christchurch, New Zealand. William Firebaugh designed it, mainly for use with the company's own LTD tonearm. The Amadeus 254 range has a two-piece plinth with squash ball isolation, and the GT version has anodised aluminium top and bottom layers, while the plain Amadeus 254 uses bamboo. In the US it sold for USD 8,750.

Key specs that matter

A servo-controlled 12 V DC motor, completely decoupled from the plinth, drives a translucent acrylic platter with an anti-static foam mat. Its belt is a loop of 0.004 mm polyester thread, 543 mm long. The separate Ctrl power supply delivers 12 V DC at 500 mA and provides electronic switching between 33 1/3 and 45 rpm. Supplied with the deck, the LTD tonearm has a 267 mm aluminium arm tube with internal damping in the Symmetrex configuration, a stainless steel collar for azimuth adjustment, a polyester thread suspension that also provides anti-skate, and silicone fluid damping of 100,000 cSt viscosity. Dimensions are 195 x 480 x 410 mm (H x W x D) and weight is 15.5 kg, or 20 kg shipped.

Engineering and use context

Its plinth has a multilayer plywood central layer between the aluminium top and bottom layers. Four squash balls sit in recesses of the bottom layer, and four Sorbothane washers on the underside of the top layer rest on them. Adjustable feet on the bottom layer allow fine levelling. The motor sits in an isolating rubber mounting.

Inside the main bearing, the spindle runs in synthetic oil between a lower and an upper Teflon bearing. Well Tempered Lab states that the zero-clearance top bearing lets the spindle stand virtually free, so the platter tilts away from the motor until the belt is installed. Any synthetic motor oil in the 5W-50 viscosity range can be used for refilling. Two belts are supplied.

On the arm, a golf ball hangs from a nylon bridle in the silicone fluid. The headshell is factory-fixed at a 19 degree angle and should not be moved. Phono (RCA) and balanced XLR outputs, both isolated from plinth and motor, sit on the rear panel with the DC input for the Ctrl and an earth screw. Warranty is one year.

Pairing

A phono stage is required, with a balanced input for the XLR output or a single-ended input for the RCA output. Cartridges without threaded holes are mounted in the headshell slot closest to the platter. Some cartridges require a shorter nylon bridle.

Alternatives

The Well Tempered Lab Amadeus 254 has the same motor, platter and tonearm with bamboo plinth layers and weighs 11 kg.

Spezifikationen

  • Modellbezeichnung

    AMADEUS 254 GT

  • Geschwindigkeit

    N/A

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    Floating

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    Symmetrex LTD, 10.5”

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    acrylic

  • Motor

    12

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    195 x 480 x 412

  • Gewicht (kg)

    15.5

  • Offizieller Link