The Fatboy Gimbal 10-3D is a 10-inch tonearm from VPI Industries of New Jersey, the gimbal-bearing version of the Fatboy next to VPI's unipivot Fatboy. VPI introduced the Fatboy at AXPONA 2018 in both unipivot and gimbal versions, first in 12-inch form and later in 10-inch and 9-inch lengths. The arm is designed for VPI turntables but can also be mounted on turntables from other brands. US list price for the 10-inch gimbal version is about USD 4,500.
Key specs that matter
Bearing type is a full gimbal bearing. Pivot-to-spindle distance is 258 mm, effective length is 273.4 mm and effective mass is 10.7 g. Overhang is 15.4 mm and offset angle is 19.98 degrees. VPI quotes an average RMS distortion of 0.31%. Internal wiring is Nordost Reference Wire, and the arm cable connects through a Lemo connector.
Engineering and use context
Its armtube is 3D-printed from materials that include epoxy resin and Delrin, and copper, aluminium and steel parts complete the arm assembly. VPI joins this 3D-printed tube to a finely machined back stock.
Its counterweight is finely adjustable, and VPI states that it makes cartridge set-up easier. Azimuth is set with side weights, and VTA is adjustable as well. According to VPI, the Fatboy adds a new level of adjustment to the VPI type of tonearm.
Fatboy armwands are backwards compatible with VPI turntables, with the exception of the Traveler and the first-version Nomad, which do not accept them without modification.
Pairing
A VPI turntable or a turntable with an armboard for a 258 mm pivot-to-spindle distance is required. A tonearm cable with a Lemo connector is required. The medium effective mass matches cartridges of medium compliance.
Alternatives
The VPI Fatboy Unipivot 10 is the same-length Fatboy arm with a unipivot bearing in place of the gimbal and azimuth set by setscrews on the side of the armtube.