SUPATRAC Blackbird and Nighthawk are two tonearms from SUPATRAC of London that Dohmann Audio lists as one entry in its tonearm range. Richard Braine, who holds a physics degree and comes from the software industry, started the design as a home project during the Covid-19 pandemic. The Nighthawk followed in 2024 and relaxes the Blackbird's constraints on effective mass, armboard compatibility and cost of manufacture. Prototypes were shown at Munich High End 2024 on a Döhmann Helix One. Both arms are hand crafted, and delivery takes several months.
Key specs that matter
Both are made in four standard sizes or custom lengths, with Baerwald geometry as default, Stevenson on request and 7 mm headshell slots. Across the four sizes the Blackbird Farpoint measures 239, 249, 277 and 315 mm in length, with effective mass of 11, 13, 15 and 19 g. Nighthawk figures are 244.5, 254.5, 282.5 and 320.5 mm and 13, 15, 18 and 22 g. A 12.7 mm pillar and 5 mm pivot bolt are used on the Blackbird, a 25.4 mm pillar and 8 mm pivot bolt on the Nighthawk. Internal wiring is replaceable 30/0.04 mm silk-covered copper litz. UK prices are GBP 4,400 - 5,200 for the Blackbird and GBP 11,900 - 12,900 for the Nighthawk.
Engineering and use context
SUPATRAC uses its patented Sideways Uni-Pivot Arm (SUPA) bearing, UK patent 2599073, which opposes stylus drag at a single point of contact and avoids the scrubbing and roll movements of conventional uni-pivots. This bearing pivots just below record level, so bursts of stylus drag produce a slight downward torque - Torque-Reaction-Assisted Contact, or TRAC. It has no gap, does not bear the weight of the arm and hangs on bearing hoists.
On the Blackbird the arm tube is pultruded carbon fibre with an aluminium-reinforced headshell area and a foam-filled cavity, clamped to the thrust box with machine screws and steel nuts. The Nighthawk armwand is a single-part double-cavity carbon fibre pultrusion with a bonded carbon fibre sole plate at the thrust box junction, about 40 mm of internal aluminium reinforcement at the headshell and an external aluminium sleeve at the thrust box end. Its construction adds 17 mm of arm length and increases vertical torque reaction. A threaded fine-VTF knob sits on the back of its Thrustbox. Both arms have damped cueing, rigid and string finger lifts, an arm rest and a protractor.
Pairing
Both are medium mass arms, and the supplied sliding mass adapter extends the range to low compliance cartridges. The standard Blackbird mount fits Rega, Linn, SME, Kuzma, Pro-Ject, Michell, Brinkmann and TW Acustic decks. Rega-type mounts do not take the Nighthawk pillar, and custom mounts are made to order.
Alternatives
The Wilson Benesch GRAVITON Ti Dohmann Edition is another tonearm in the Dohmann Audio range.