Hifiverse

Tonarme - Clearaudio SATISFY KARDAN

Beschreibung, Bilder, technische Daten und Spezifikationen

Clearaudio SATISFY KARDAN
Bildquelle - (c) Clearaudio

The Satisfy Kardan is a radial tonearm from Clearaudio of Erlangen, Germany, with a gimbal suspension on two axes and sapphire bearings from the German watch industry. Clearaudio states that it can be combined with a wide range of turntables and cartridges. It is offered with an aluminium tube in silver or black, with a carbon tube, and as the Satisfy Kardan Signature in an all-black finish.

Key specs that matter

Design principle is a radial tonearm with magnetic anti-skating. Effective length is 239.12 mm, overhang is 17.12 mm and mounting distance is 222 mm (tonearm pivot to spindle). Offset angle is 24.02°, and overall length is 305 mm. Adjustable cartridge weight is 2.5 - 17.0 g. Including the counterweight, the aluminium and Signature versions weigh approx. 490 g and the carbon version approx. 480 g. Its signal cable is 1.1 m of Clearaudio Direct Wire PLUS terminated with MPC RCA plugs. Materials are black or silver aluminium and stainless steel.

Engineering and use context

In the vertical bearing a polished tungsten shaft is embedded in precisely balanced sapphire bearings. Its horizontal bearings are made of durable ceramic. Anti-skating is set magnetically and fixed with an easily accessible set screw on the side of the bearing housing. Azimuth is adjusted via the aluminium headshell, which comes pre-mounted on the tube.

Clearaudio describes continuous direct wiring as one of the special technical features of the Satisfy Kardan. The audio signal is routed without physical interruption from the cartridge through the entire tonearm to the phono preamplifier. According to the maker, all tube variants combine high stability with resonance-optimised material properties.

Operating instructions are supplied in German and English. Clearaudio gives a 2-year manufacturer's warranty, valid when the completed warranty card is returned within 14 days of purchase.

Pairing

A phono preamplifier with RCA inputs is required. On turntables from other makers an arm board prepared for the Clearaudio mounting distance is required.

Alternatives

The Profiler is the Clearaudio radial tonearm that combines features of the Satisfy Kardan and Tracer ranges with a horizontal sapphire and vertical ball bearing.

Spezifikationen