Hifiverse

Tonarme - Graham Engineering Phantom 3 9"

Beschreibung, Bilder, technische Daten und Spezifikationen

Graham Engineering Phantom 3 9"
Bildquelle - (c) Graham Engineering

The Phantom III 9-inch is a unipivot tonearm from Graham Engineering, the American company founded by designer Bob Graham, who has been developing tonearms since the mid-1980s. It keeps the specification of the Phantom II and adds a new titanium armwand, a new pivot housing assembly and new internal wiring. It is also made in 10-inch and 12-inch versions. In 9-inch form the arm costs USD 7,000, and an additional 9-inch armwand is sold separately for USD 1,000.

Key specs that matter

Effective length is 235 mm and effective mass is 11.5 g. Spindle-to-pivot distance is 217.4 mm, with an overhang of 17.6 mm. Cartridge weight range is 5 - 18 g. The arm base is an SME (standard) mount, and the output terminal is a 5-pin DIN socket. Tonearm weight is 1100 g. Bearing type is a unipivot with Graham's patented Magneglide magnetic stabilisation and pivot fluid damping.

Engineering and use context

In the Magneglide system, neodymium (rare-earth) magnets are placed in a horizontal line from the pivot point of the tonearm. According to Graham Engineering, they give a lateral stability that feels almost like a fixed-bearing arm. Combined with pivot fluid damping, similar to that of the Model 2.2, Magneglide forces the Phantom to pivot in the correct vertical plane of the stylus tip, with no rotation as the arm is raised. Magneglide first appeared on the Phantom B-44 around 2005 and continued through the Phantom II and Phantom II Supreme.

For the III, the pivot housing assembly is a constrained-layer combination of brass and tungsten with an upgraded pivot design. A slightly reshaped counterweight widens the range of cartridge weights. New internal wiring runs through the armwand and the bearing housing, and Graham states that it gives improved freedom from mechanical resistance.

Pairing

A turntable with an SME-standard tonearm cut-out is required for the base. A phono cable with a 5-pin DIN connector is required. Cartridge weight must fall within the specified range.

Alternatives

Graham Engineering's Phantom Elite is the higher model of the Phantom unipivot range.

Spezifikationen