Hifiverse

Phonovorstufen - iFi Audio ZEN Air Phono 2

Beschreibung, Bilder, technische Daten und Spezifikationen

iFi Audio ZEN Air Phono 2
Bildquelle - (c) iFi Audio

The ZEN Air Phono 2 is a compact MM and MC phono stage from iFi audio, the British company behind the ZEN desktop range. It went on sale on 30 April 2026 at USD 129, GBP 129, EUR 149 or CAD 189, together with the ZEN Air Blue 2 Bluetooth receiver and the ZEN Air DAC 2. iFi offers it as a replacement for the phono stages built into record players and amplifiers.

Key specs that matter

Gain is 40 dB (±1 dB) for MM and 64 dB (±1 dB) for MC. Input impedance is 47k ohms in MM mode and 1k ohms in MC mode, and output impedance is 100 ohms. RIAA accuracy is ±0.15 dB (20 Hz - 20 kHz). Equivalent input noise is -146 dBV (A-weighted) or 0.6 nV/√Hz unweighted for MC, and -126 dBV (A-weighted) or 6.5 nV/√Hz for MM. SNR is 86 dB (A-weighted, re 1 V) in MM mode. THD is below 0.005% for MM and 0.036% for MC (re 1 V). Channel separation is above 75 dB (1 kHz, all modes). Maximum output is 6.5 V RMS into 600 ohms (<1% THD+N). Power supply requirement is 5 V DC at 1.0 A or more, and consumption is below 1.8 W. Dimensions are 158 x 117 x 35 mm, and net weight is 323 g.

Engineering and use context

According to iFi, the circuit uses a symmetrical channel layout that gives some of the benefits of balanced circuitry, such as lower noise, higher output and improved channel separation. Its inputs and outputs are single-ended. The Intelligent Subsonic Filter is an iFi design used since 2012, and it treats vertical information in the groove differently from lateral information. iFi states that only record warp is filtered, without attenuating low bass and without adding group delay.

A short press of the SUBSONIC button on the front switches the filter, and front LEDs show the MM or MC setting. The gain switch itself is on the rear panel. After 10 minutes of operation it locks and is unlocked by a short press of the front button. MM mode is intended for cartridges with an output of 2 mV and above, MC mode for outputs below 2 mV. After some time in use the microcontroller goes into sleep mode to lower noise, so the power switch must be pressed twice to turn the unit off. A USB to DC cable, a quick start guide and a warranty card come in the box. Warranty is 12 months, or 24 months in the EU.

Pairing

The turntable connects to the RCA input, with its grounding wire on the ground terminal. A line-level input of an amplifier or receiver takes the RCA output. iFi recommends a low-noise 5 V adapter such as the iPower2 or iPower X.

Alternatives

The iFi ZEN Phono 3 is the step-up ZEN phono stage, with four gain settings from 36 to 72 dB, adjustable loading and a balanced output.

Spezifikationen

  • Modellbezeichnung

    ZEN Air Phono 2

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    MM 0.005, MC 0.036

  • Abmessungen (mm)

    158 x 117 x 35

  • Gewicht (kg)

    0.323

  • Offizieller Link