Hifiverse

Phonovorstufen - Circle Labs Audio V1000

Beschreibung, Bilder, technische Daten und Spezifikationen

Circle Labs Audio V1000
Bildquelle - (c) Circle Labs Audio

The V1000 is a tube phono preamplifier for MC and MM cartridges from Circle Labs of Cracow, Poland. Its two inputs take two phono cartridges independently, and a step-up transformer of Circle Labs' own design is used for moving coils. Circle Labs says it is one of the few companies to have developed its own SUT from the basics. The power supply sits in a separate enclosure. Other models in the current range are the A200 and AS100 integrated amplifiers, the P300 preamplifier and the M200 and M500 power amplifiers.

Key specs that matter

Gain is 65 or 70 dB for MC and 45 dB for MM. Inputs are 2 x RCA, with loading of 10 - 1000 ohms and 0 - 320 pF set independently for each input. Outputs are RCA and balanced XLR. Equalisation offers turnover settings of 230, 318 (RIAA), 400 and 630 µs and roll-off settings of 100, 75 (RIAA), 50 and 25 µs. Its tube complement is four E88CC/6922. Dimensions are 130 x 430 x 365 mm and weight is 9.5 kg for the preamplifier, while the power supply measures 83 x 98 x 210 mm and weighs 2.8 kg. A T400mA delayed 5 x 20 mm fuse is used, and the power cord is 1.2 m long.

Engineering and use context

In the step-up transformer, the primary winding is Litz wire of 25 individually insulated strands in a silk braid, and the secondary is high-quality copper. Winding resistances are 0.25 ohm and 22 ohm, kept low to reduce signal loss from the cartridge. From the SUT the signal goes to the MM stage, which is based on four ECC88/6922 tubes with fixed cell bias. No feedback is used anywhere in the circuit.

Each channel has its own independent and isolated circuit in a fully dual-mono layout. In the power supply Circle Labs uses Mundorf polypropylene capacitors and a cascaded two-stage stabiliser without feedback. To reduce interference, the power transformers are housed in the separate enclosure.

On the front panel two knobs set the classic RIAA equalisation or other curves for records released before RIAA standardisation. Further knobs select MC, MUTE or MM and choose between the two arms or cartridges.

Pairing

A line input on a preamplifier or integrated amplifier is required. The balanced output connects to an XLR line input, and the RCA pair to any unbalanced one. In the Circle Labs range the matching preamplifier is the P300. The two inputs allow two turntables, or one turntable with two arms.

Alternatives

The V1000 is the only phono preamplifier in the Circle Labs range, so the brand has no other model in this category.

Spezifikationen

  • Modellbezeichnung

    V1000

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    MC: 65/70, MM: 45

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    130 x 430 x 365

  • Gewicht (kg)

    9.5

  • Offizieller Link