The uPhono+ is a multifunction MM/MC phono preamplifier from Unison Research of Treviso, Italy. Alongside its analogue outputs it has an A/D converter with three digital outputs and a high-current headphone stage, so a turntable can be connected to a line input, a computer for archiving records, a DAC or a pair of headphones. The UK price was GBP 1,100.
Key specs that matter
Two cartridge inputs are provided - MM and high-output MC, and low and ultra-low output MC. System gain at 1 kHz is 38 dB for MM and 58 dB or 69 dB for MC, set by dip-switches. MM input impedance is 47 kohms with 100, 200, 320 or 420 pF, and MC loading is 20, 50, 100, 150, 250, 500 ohms or 1 kohm, with 1 nF. RIAA curve accuracy is ±0.3 dB from 20 Hz to 30 kHz. THD+N at 1 kHz is 0.018% for MM (10 mV in) and 0.12% for MC at either gain (1 mV in). Signal-to-noise ratio is -80 dB for MM, -64 dB for MC at 58 dB and -60 dB for MC at 69 dB. Nominal output level is 316 mV RMS (-10 dBV), line output impedance is 824 ohms, and overload margin is 30 dB. Dimensions are 82.5 x 216 x 251 mm (H x W x D) including feet, connectors and knobs, and weight is 2.6 kg.
Engineering and use context
Its analogue outputs are one fixed-level pair and one variable-level pair. An Alps Blue Velvet potentiometer on the front panel adjusts the level of the variable output and the volume of the headphone stage at the same time. A subsonic IEC anti-rumble filter (-3 dB at 20 Hz, 6 dB per octave) can be overridden with a dip-switch. According to Unison Research, widespread use of SMD components keeps the signal path short.
A/D conversion uses a Cirrus Logic CS5341 at 16 or 24 bits and 8 to 96 kHz. Asynchronous USB transmission on the type B port uses a Bravo SA9137, and the Toslink optical and coaxial outputs use a TI DIT4096 (0.5 Vp-p into 75 ohms, 96 kHz max). Inside is a low-noise mains power supply with independent analogue and digital supplies. Mains versions exist for 220 - 240 V AC and 100 - 120 V AC, and consumption is 6.6 W.
Pairing
The 6.35 mm headphone jack accepts headphones from 16 to 600 ohms, with 2.18 V RMS maximum output and 0.07% THD+N (1 kHz, 32 ohms). Its variable output allows a power amplifier or active monitors to be connected without a preamplifier. A computer with recording software is required for USB archiving.
Alternatives
The Unison Research Simply Phono is a pure class A tube phono stage with four ECC83/12AX7, passive RIAA equalisation and an external power supply.