Hifiverse

Phonovorstufen - MasterSound Stilo

Beschreibung, Bilder, technische Daten und Spezifikationen

MasterSound Stilo
Bildquelle - (c) MasterSound

The Stilo is the phono preamplifier in the catalogue of MastersounD, the tube amplifier company founded in 1994 by Cesare Sanavio and his sons and based in Arcugnano, in the province of Vicenza. In archaic Italian the word stilo also means style. It is an all-tube MM/MC design operating in pure Class A, built by hand in Italy. Italian prices run from about EUR 5,841 to EUR 6,156 depending on the side panel finish, walnut or black.

Key specs that matter

Three ECC803 tubes make up the tube complement. Gain is 60 dB for MC and 40 dB for MM, and the Low setting reduces either figure by 5 dB. The MM input presents 47 kohm, and the MC input offers 40, 100, 200, 400 or 800 ohm. Input capacitance has five settings - 0, 150, 270, 470 and 560 pF. RIAA accuracy is ±0.5 dB, and frequency response is 1 Hz - 100 kHz (0 dB). Inputs are one MM RCA pair and one MC RCA pair, and the output is a single fixed line-level RCA pair. Power consumption is 19 W. Dimensions are 350 x 310 x 115 mm (W x D x H), and weight is 6.1 kg.

Engineering and use context

For moving coil cartridges the MC section uses Lundahl step-up transformers. Its circuit has low-noise power supply sections and a simple signal path. On the rear panel, two rotary selectors set MC impedance and input capacitance, while toggle switches choose MM or MC mode and High or Low gain. Input switching uses a micro relay, front LEDs show the selected mode, and a ground terminal is provided for the turntable.

Each unit is factory-set for the mains voltage of its destination country, 230 V at 50 Hz or 110-120 V at 60 Hz, and is protected by an 800 mA tube fuse and an 8 A main fuse. MastersounD selects and measures its tubes, aligns the curves of the two channels after installation and tests every unit for at least 48 hours before shipping. The tubes usually arrive installed, together with a mains cable and the manual. Across the range the company winds its output transformers by hand on a mechanical winding machine, and the Stilo shares the steel chassis and wooden side panels of its amplifiers.

Pairing

A line input on a preamplifier or integrated amplifier is required. The output must not go to a phono input.

Alternatives

MastersounD lists no second standalone phono preamplifier, so there is no other model of this type in its range.

Spezifikationen

  • Modellbezeichnung

    Stilo

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    MM: 47 000, MC: 40/100/200/400/800

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    60 MC / 40 MM

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    >100 000 (0 dB)

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    350 x 310 x 120

  • Gewicht (kg)

    6

  • Offizieller Link