The Referenceline 7 (RL-7) is a two-chassis phono preamplifier from HSE Swiss Audio. HSE presents it as the little brother of the Masterline 7. It also includes an integrated preamp with a variable headphone output and the main volume control. HSE states that it is engineered for a life expectancy of at least 30 years and uses handmade Swiss components.
Key specs that matter
Architecture is fully balanced class A and dual mono, with discrete inputs and outputs. There are two balanced stereo inputs, each with individual settings. Gain is 30 - 75 dB at 1 kHz in 5 dB steps, with a maximum gain of 84 dB at the right volume position. Input impedance is 10 ohms - 2,530 kOhms plus 47 kOhms in 256 positions, and capacitance is 0 pF or 33 - 581 pF in 16 positions. RIAA accuracy is ±0.05 dB, THD is 0.0007% and frequency response is 1.5 Hz - 150 kHz. Equivalent input noise is -142 dB (22 Hz - 22 kHz, 62 nV), crosstalk is above 90 dB and headroom above 24 dB at 1 kHz. The main output is one balanced stereo pair (24 dBu at 600 ohms, max. 17 V RMS), and the headphone output delivers 22 dBu at 300 ohms. The audio unit weighs 2.4 kg and the power supply 2.9 kg, and both measure 247 x 58 x 290 mm.
Engineering and use context
The RL-7 uses the same zero-ohm class A ultra-low-noise head-amps as the ML-7. An active balanced subsonic filter works at 15 Hz with 12 dB per octave. Its functions include mute, overload and signal indicators and a ground lift.
Power comes from a separate unit with an oversized toroidal transformer that has static and magnetic shielding, for 100, 115 or 230 V mains at 26 W. Both champagne-coloured cases are milled and brushed aluminium with anodised printing, and the earth connector, side parts and volume knobs are 24-carat hard-gold plated. Rotary controls use hand-matched ALPS Blue Velvet parts.
Important electronic components are hand-selected and matched to 0.1% maximum variance, with parts from ELMA, Goldpoint, NKK, Panasonic, WIMA, Neutrik, Schurter and ALPS. Each unit passes a two-week continuous hardening and maturing test. HSE optimised the impedance selector for Benz, Lyra, XYZ and Ortofon cartridges. The RL-7 ships in a flight case, 12.5 kg and 550 x 400 x 250 mm in total.
Pairing
A tonearm cable with balanced connectors is required for both inputs. The balanced main output requires a power amplifier or preamplifier with balanced inputs. With the volume control in use, it drives power amplifiers directly.
Alternatives
The Masterline 7 (ML-7) is the higher HSE phono preamplifier.