Hifiverse

Phonovorstufen - Constellation Audio Revelation 2 Phono Preamplifier

Beschreibung, Bilder, technische Daten und Spezifikationen

Constellation Audio Revelation 2 Phono Preamplifier
Bildquelle - (c) Constellation Audio

The Revelation 2 Phono Preamplifier is a solid-state phono stage with a separate power supply chassis from Constellation Audio of California. Constellation's Revelation 2 series sits between the entry-level Inspiration 2 range and the Performance 2 and Statement lines, and it also includes the Revelation 2 Preamp, Stereo and Mono amplifiers. UK price is GBP 33,998. Constellation states that it has fewer inputs and EQ options than the Performance 2 Phono Preamplifier.

Key specs that matter

Inputs are 2 x XLR stereo and 2 x RCA stereo, each for MC or MM cartridges, and outputs are 1 x XLR and 1 x RCA. Gain is 65 dB maximum, balanced and unbalanced. MC load impedance is 5 - 1,000 ohms in 1 ohm steps. MM load impedance is 10, 33 or 47 kOhm, with load capacitance of 0, 100 or 200 pF. Output noise is -96 dB re. 2 V output (20 Hz - 20 kHz), and THD+N is below 0.008% (10 Hz - 20 kHz). Frequency response is ±0.10 dB (10 Hz - 20 kHz) on the RIAA curve. Output impedance is below 5 ohms, balanced and unbalanced. The phono unit measures 432 x 216 x 585 mm (W x H x D) and the power supply 432 x 70 x 368 mm. Total weight is 16 kg, of which 5 kg is the power supply.

Engineering and use context

At the centre of the circuit is a classic RIAA EQ design that Constellation has refined over decades. It is coupled to a fully balanced output stage based on the Line Stage Gain Modules of the company's line preamplifiers, with hand-matched ultra-low-noise transistors.

Load settings for each channel and each MC input are stored independently. Settings are made on an LCD touchscreen with control buttons and indicators along its lower edge.

For the Revelation 2 version, Constellation updated the phono stage with its SMPS, a switched-mode power supply in its own chassis. According to the company, it is more than 20 dB quieter than a typical linear supply and gives consistent DC whatever the mains voltage. Thick machined aluminium slabs enclose it, so that it cannot interfere with the phono circuits. Each Constellation preamplifier and phono stage supply is unique to its product and is not interchangeable with another.

Pairing

A line preamplifier with XLR or RCA inputs is required. Its matching preamplifier is the Revelation 2 Preamp. Both MC and MM cartridges are covered by the load settings.

Alternatives

The Performance 2 Phono Preamplifier is the Constellation phono stage of the next series up, with more inputs and EQ options.

Spezifikationen

  • Modellbezeichnung

    Revelation 2 Phono Preamplifier

  • Eingänge (symmetrisch)

    2

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    5 - 1000 / 10000

  • Ausgangsimpedanz (Ω)

    5

  • Verstärkung (dB)

    65

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20000

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    432 x 381 x 140

  • Gewicht (kg)

    16

  • Offizieller Link