Hifiverse

Phonovorstufen - NAD PP 2e

Beschreibung, Bilder, technische Daten und Spezifikationen

NAD PP 2e
Bildquelle - (c) NAD

The PP 2e is a phono preamplifier from NAD for moving-magnet (MM) and moving-coil (MC) cartridges. It succeeds the PP 2, and NAD presents it as a way to add dedicated phono capability to systems with basic or absent phono inputs, such as amplifiers and receivers that lack a built-in phono stage.

Key specs that matter

The MM input has an input impedance of 47 kOhm + 200 pF, a gain of 35 dB at 1 kHz and an input sensitivity of 2.5 mV (ref. 200 mV output). Its signal-to-noise ratio is 80 dB (A-weighted, with cartridge connected), and input overload is 10/102/950 mV at 20 Hz/1 kHz/20 kHz. For the MC input the same figures are 100 ohms + 180 pF, 60 dB, 0.3 mV, 78 dB and 0.8/9/84 mV. On both inputs rated distortion is below 0.03% (THD, 20 Hz - 20 kHz) and RIAA response accuracy is ±0.3 dB. Output impedance is 100 ohms, and maximum output level is 5.3 V. Power comes from an external 23.5 V DC supply, and without it the case measures 135 x 49 x 72 mm (W x H x D).

Engineering and use context

According to NAD, the external supply helps maintain stable performance. An Auto Power Down function switches the PP 2e into standby when it is not in use to reduce energy consumption. Gold-plated input and output sockets are used for long-term connection to the turntable and the amplifier.

Support for both cartridge types gives the PP 2e compatibility with a wide range of turntables. Input loading is fixed at one resistance and one capacitance value per input.

Pairing

MM cartridges connect to the MM input, and low-output MC cartridges to the MC input. A cartridge that requires a different load value needs a phono stage with adjustable loading. The line-level output connects to a line input of an integrated amplifier, preamplifier, streaming amplifier or AV receiver.

Alternatives

NAD also makes the PP 4, a phono preamplifier for MM and MC cartridges that adds a USB output for recording.

Spezifikationen

  • Modellbezeichnung

    PP 2e

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    47 000 (MM) + 100 (MC)

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    135 x 49 x 72

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten