The PH1, listed as PH-1, is a compact moving magnet and moving coil phono preamplifier from Emotiva Audio Corporation of Franklin, Tennessee. It applies RIAA equalisation to the output of an MM or MC cartridge and delivers the result to a line-level input of a preamplifier, preamp/processor or AV receiver. Emotiva sells it for USD 59 and sizes it so that one unit can be used for each turntable in a system.
Key specs that matter
Gain is 40 dB (MM) and 60 dB (MC). Input impedance is 47 kOhm for MM, the industry-standard load, and 100 ohms for MC, the value Emotiva says MC cartridge makers most often recommend. RIAA accuracy is ±0.5 dB from 20 Hz to 20 kHz on both inputs. THD (A-weighted) is below 0.02% at 1 kHz and below 0.01% at 20 Hz in MM mode, and below 0.003% at 1 kHz and below 0.002% at 20 Hz in MC mode. Dimensions are 102 x 70 x 29 mm (W x D x H) without the rear connectors, which need about 19 mm of extra clearance.
Engineering and use context
According to Emotiva, the all-metal case was chosen for ruggedness and for immunity from noise and interference. Its rear panel has one stereo pair of gold-plated RCA phono inputs, a stereo pair of unbalanced line-level outputs, a gold-plated ground lug and a USB Type-C power socket. Power comes from an external low-noise USB-C AC adapter with automatic detection of 100 - 240 V AC at 50/60 Hz, and a matching 2 m USB-C cable is included. Emotiva does not recommend any other adapter or USB cable with the PH1.
On the front panel a single pushbutton selects MM or MC operation. Two LEDs indicate the selected cartridge type, and a third LED shows that power is on. Muting circuitry protects the outputs from unintended noise if power is lost or disconnected, although the manual still advises turning the preamplifier down or selecting another input while the PH1 is not in use. The small enclosure allows placement close to the turntable.
Pairing
The outputs connect to a stereo Aux or CD line input. A turntable with a switchable internal phono preamplifier has to be set to bypass so that the cartridge connects directly to the PH1. A separate ground wire from the turntable goes to the ground lug.
Alternatives
The XPS-1 is Emotiva's other MM/MC phono preamplifier.