Hifiverse

Phonovorstufen - Creek Audio OBH-8mk2

Beschreibung, Bilder, technische Daten und Spezifikationen

Creek Audio OBH-8mk2
Bildquelle - (c) Creek Audio

The OBH-8mk2 is a standalone MM phono preamplifier from Creek Audio of London and the replacement for the original OBH-8. Creek designed it because the phono input, once common on amplifiers, has disappeared from many current models. It applies RIAA equalisation and raises a turntable signal to line level, given by Creek as 200 mV to 500 mV sensitivity with a flat frequency response. UK list price is GBP 129, and the case is black.

Key specs that matter

Gain is 40 dB (x100). Input matching is 47 kOhms and 100 pF for moving magnet cartridges. THD+N is below 0.003% at 2 V RMS output from 20 Hz to 20 kHz. RIAA accuracy is ±1 dB (20 Hz - 20 kHz), signal-to-noise ratio is above 74 dB at 2 V output, and channel separation is above 70 dB at 1 kHz. Maximum output level is 6 V, with an overload margin of 21.7 dB. Output impedance is 100 ohms. Total power consumption is below 3 W. Dimensions are 100 x 37 x 90 mm (W x H x D), and weight is below 0.5 kg.

Engineering and use context

Compared with the original OBH-8, the mk2 has a completely new circuit design with an integrated circuit MM stage. Constant current sources at the output of the gain stage push it into Class A to reduce distortion. Together with the low output impedance, the company specifies this output stage for driving long cables.

Its power supply is split into a negative and a positive voltage by a custom Creek discrete circuit. Two capacitance multipliers then filter each supply before it powers the preamplifier circuitry, reducing the ripple. External power comes from the OBH-Uni, a multi-region regulated adapter rated at 24 V and 0.5 A for 90 V to 250 V mains. Creek says it can provide four times more power than a phono preamplifier requires, and it draws below 0.1 W when idle. The same adapter powers the OBH-15mk2, and Creek describes both high-gain phono stages as demanding of power supply purity.

For the mk2 Creek developed a new low profile metal case to reduce cost without reducing build quality. This smaller case is styled to complement the full-size Creek components.

Pairing

A turntable with a moving magnet cartridge is required. The output connects to a line input on an integrated amplifier, preamplifier or active speaker system. One turntable can be connected at a time.

Alternatives

The OBH-15mk2 is the other standalone phono preamplifier in the Creek Audio range.

Spezifikationen

  • Modellbezeichnung

    OBH-8mk2

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    100

  • Verstärkung (dB)

    40

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Klirrfaktor + Rauschen (%)

    <0.003

  • Abmessungen (mm)

    100 x 37 x 90

  • Gewicht (kg)

    <0.5

  • Offizieller Link